the spi intake valve seat #4 finally let go about 2 weeks ago, seems like a good august project for me, the sidewalls look fine, i plan on putting in a new piston, i already have a new cylinder head:http://shop.advanceautoparts.com/web...inder+head+atk does anyone out there have a piston and connecting rod i could buy off them? maybe a set of rings for it too?
yeah for what your spending on the new head im sure you could find a complete zetec setup for the same price or maybe a little bit more, but if you stick with the spi good luck hopefully it doesn't drop again
08-08-2012 06:41 PM
my plan : fix it and sell it!
08-09-2012 06:56 AM
Does anyone know the best way to clean all the deposits out of the intake manifold? Other than shaking it upside-down?
09-02-2012 11:23 PM
I shot engine degreaser in mine about half way full and let it set for ten minutes, then hosed it out with a garden hose in the number 4 intake while it was resting on the ground and letting the water come out the number 1 intake
09-02-2012 11:39 PM
hey I think I still have one piston from my engine. dinged up top just a bit but the top ring is still free and it will work just fine.