Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/)
-   SPI Performance (2000-2004) (http://www.focusfanatics.com/forum/spi-performance-2000-2004/)
-   -   Torque settings (http://www.focusfanatics.com/forum/spi-performance-2000-2004/292134-torque-settings.html)

scorp 07-06-2012 08:28 PM

Torque settings
 
New here and I did use the search function, but couldn't find answer

I have just put new rings and pistons in my sons 2000 Focus, (Valve seat dropped), new head etc

I am looking for the torque specs on the connecting rod bearing caps.

I have seen 28ftlb's + 90 degrees .......26ftlbs + 90 degrees.........12ftlbs + 60 degrees...and a couple more

Anybody have any idea what they should actually be, I did the 28ftlb + 90 degrees, but it seems overly tight

Thanks in advance


Ooops sorry wrong forum I guess!

poppop 07-07-2012 11:47 AM

Ford manual-38Nm or 28.5 Ftlb's.

The only torque spec. with additional turning are the head bolts.50Nm and two turns of 90 degrees.


All times are GMT -5. The time now is 10:15 AM.



Search Engine Optimization by vBSEO 3.6.1