European Spec Tails - MADE SIMPLE!!!

[castone]

great write up!

also like to add that,
instead of cutting the socket to fit the euro lights
you can use a file on the inside of the euro light were the bulbs connect too make the plug fit.
so you dont have to worry about wrecking the stock connectors

[zx360]

does the whole light blink with the blinker now or just the actual blinker? because i think ive only seen 1 or 2 people who have it so only the blinker blinks

and holy thread revival! (i didnt check the date of the OP lol WOW)

[faster_than_u]

THIS METHOD DOES NOT WORK!! there is another how to im looking for that is the proper way. with this way both lights flash

[faster_than_u]

use this how to if you have a 2002-2007 http://www.focusfanatics.com/forum/s...ad.php?t=65546

[Mile30]

Thanks for the pics!!!
I'm going to attempt this mod on my ZX3 w/ some smoked Euro-taillights... I'll take some pictures when I do.

[muttsnutts]

All you need to do is cut the red/green wire at the hazard light switch, that removes the brake lights, but you still have indicators, splice the wires at the back to the old reverse light fit an orange bulb then you have indicators, for brake lights tie into the third brake light (Which still works after you cut the red/green wire at the switch) there you go job done