Big plans, tom need some sugg.

[crashmech13]

ok tom im gonna be swapping trannies here soon and upgrading to a T3 turbo and prob gonna get your manifold. but i need to know what other things i need to build up my engine for this bigger turbo and more boost. i need specifics on what is the best piston size and rods for me and cams, the whole nine yards need your input, or anyone who can help, i want good amount of hp, but i really want great midrange since that is where most of the useable power is. thanks

[Sponsor]

[1turbofocus]

First i need a power goal

Tom

[crashmech13]

300-350 hp somewhere in there

[1turbofocus]

If 350 is all than the stock block will do , I would do the crower rods and larger valves then everything else listed in my website for built engine

Components:
Professionally Ported and Polished
Cylinder Head
Forged Pistons (Compression ratios
from 8.0:1 to 14.0:1)
Forged Eagle "H-Beam" Connecting Rods
New Billet Main caps (Installed bored
and line honed)
New Rod and Main Bearings
New Piston Rings
ARP Head and Main Stud
New Oil Pump (custom work to oil pump
and oil holes in block)
New Timing Belt
New Front and Real Seal
New Gaskets
Balanced Rotating Assembly
Blue Printed Block


Tom

[crashmech13]

if i were to get your block would that take care of most of the stuff on that list besides like the rods and pistons or no? cause i want like 300-350 for now but i eventually would like more so if i got the block now to take care of the other parts then i wouldn't have to get it later.

[1turbofocus]

You could do it that way yes

Tom

[crashmech13]

ok if i were to do that what would be the list of items to still be bought? and for everything that is needed pistons rings block the whole nine yards what would it cost?

[1turbofocus]

There is full pricing on my web site for all of the above and a list of what all comes in the built engine

Tom