SVT rear hub/spindle gasket? - Focus Fanatics
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace



Go Back   Focus Fanatics > Ford Focus Tech Discussions > Brakes, Suspension & Body Chassis

Brakes, Suspension & Body Chassis The place to go for answers on brakes, suspension, camber, alignment and more.

Search This Forum | Image Search | Advanced Search    
FocusFest Ford Focus Tire & Wheels FocusFanatics Merchandise

Reply
 
Thread Tools Display Modes
Old 05-28-2013, 09:33 PM   #1
Magus2727
Focus Fanatic
 
Magus2727's Avatar
 
Join Date: Feb 2009
Fan#: 62897
Location: Salt Lake City, UT
What I Drive: 2001 Malibu Blue ZX3

Posts: 3,772
FF Reputation: 9 Magus2727 Good Standing Member
Buy-Sell-Trade Rating: (2)
SVT rear hub/spindle gasket?

I have recently purchased a SVT rear brake kit. In taking it apart to clean and paint i removed the hub from the spindle. I also removed the gasket that was left on the spindle. I removed this as carefully as i could but think its is still slightly damaged. I have looked to see if I can purchase just the gasket but none of the pictures that i have been able to find look like what I removed.

Does any one know the part # for this?

Thanks.


__________________
2001 ZX3 2.0L Zetec-
Hatch Nation #42

Going through Rebuild See "The TICK Build Thread" for details (http://www.focusfanatics.com/forum/showthread.php?t=289168&referrerid=62897)
Magus2727 is online now  
    Reply With Quote
Sponsored Links
Advertisement
 
Old 05-28-2013, 11:00 PM   #2
iminhell
C2H5OH
 
iminhell's Avatar
 
Join Date: Jun 2006
Fan#: 36222
Location: Darwin, MN
What I Drive: 2000 & 2001 ZX3's

Posts: 10,219
FF Reputation: 48 iminhell Great Standing Member
Buy-Sell-Trade Rating: (4)
NOS 18849




Anything like that?
iminhell is online now  
    Reply With Quote
Old 05-29-2013, 02:27 PM   #3
Magus2727
Focus Fanatic
 
Magus2727's Avatar
 
Join Date: Feb 2009
Fan#: 62897
Location: Salt Lake City, UT
What I Drive: 2001 Malibu Blue ZX3

Posts: 3,772
FF Reputation: 9 Magus2727 Good Standing Member
Buy-Sell-Trade Rating: (2)
Not really. it was rubber on the inside and out side and only had metal on the inside. I will take a picture of it when I get home this evening.
__________________
2001 ZX3 2.0L Zetec-
Hatch Nation #42

Going through Rebuild See "The TICK Build Thread" for details (http://www.focusfanatics.com/forum/showthread.php?t=289168&referrerid=62897)
Magus2727 is online now  
    Reply With Quote
Old 05-30-2013, 07:24 AM   #4
jasonbi
Focus Addict
 
jasonbi's Avatar
 
Join Date: Sep 2004
Fan#: 13305
Location: St John's, Canada
What I Drive: 2002 SVT

Posts: 579
FF Reputation: 3 jasonbi Good Standing Member
Buy-Sell-Trade Rating: (0)
i just did the rear bearings on my svt....called ford looking for that same gasket, apparently it comes with the spindle and not sold separately. not sure whats available in the aftermarket
__________________
#3286 OF 4788
jasonbi is offline  
    Reply With Quote
Old 05-30-2013, 05:16 PM   #5
Magus2727
Focus Fanatic
 
Magus2727's Avatar
 
Join Date: Feb 2009
Fan#: 62897
Location: Salt Lake City, UT
What I Drive: 2001 Malibu Blue ZX3

Posts: 3,772
FF Reputation: 9 Magus2727 Good Standing Member
Buy-Sell-Trade Rating: (2)
Later than I said i would post it...



Looks like I might be having to form these back then. And I will keep hubs on the list knowing they might need to be replaced in the next year or two. One is in better shape than the other, but should form back once it gets pressed onto the spindle.

Its some what frustrating that a part like that is not replaceable. the HUB is very easy to remove and you dont always want/need to replace the hub when you choose to remove it.
__________________
2001 ZX3 2.0L Zetec-
Hatch Nation #42

Going through Rebuild See "The TICK Build Thread" for details (http://www.focusfanatics.com/forum/showthread.php?t=289168&referrerid=62897)
Magus2727 is online now  
    Reply With Quote
Old 05-30-2013, 09:31 PM   #6
jasonbi
Focus Addict
 
jasonbi's Avatar
 
Join Date: Sep 2004
Fan#: 13305
Location: St John's, Canada
What I Drive: 2002 SVT

Posts: 579
FF Reputation: 3 jasonbi Good Standing Member
Buy-Sell-Trade Rating: (0)
thankfully mine were in ok shape, looked a little better than yours..lol.
__________________
#3286 OF 4788
jasonbi is offline  
    Reply With Quote
Old 05-30-2013, 10:17 PM   #7
Lappracing
Focus Enthusiast
 
Join Date: Apr 2010
Fan#: 74732
Location: Moorpark, CA
What I Drive: 2009 Focus black/silver

Posts: 67
FF Reputation: 2 Lappracing Good Standing Member
Buy-Sell-Trade Rating: (3)
I believe there is a replacement part from Timken, P/N SL260005. Rockauto.com sells it for $10 with the installation tool.
Lappracing is offline  
    Reply With Quote
Old 05-30-2013, 10:41 PM   #8
iminhell
C2H5OH
 
iminhell's Avatar
 
Join Date: Jun 2006
Fan#: 36222
Location: Darwin, MN
What I Drive: 2000 & 2001 ZX3's

Posts: 10,219
FF Reputation: 48 iminhell Great Standing Member
Buy-Sell-Trade Rating: (4)
^Looking at pictures, that seal driver I think is the ABS ring.
I'll have to look if I have one at work, don't think my picture is complete (NAPA sells SKF).

...
iminhell is online now  
    Reply With Quote
Old 05-30-2013, 11:29 PM   #9
Lappracing
Focus Enthusiast
 
Join Date: Apr 2010
Fan#: 74732
Location: Moorpark, CA
What I Drive: 2009 Focus black/silver

Posts: 67
FF Reputation: 2 Lappracing Good Standing Member
Buy-Sell-Trade Rating: (3)
That's not the ABS ring. Here is a side view.



Here is an ABS ring.
Lappracing is offline  
    Reply With Quote
Old 05-30-2013, 11:39 PM   #10
Sniper Focus
Focus Addict
 
Sniper Focus's Avatar
 
Join Date: Mar 2011
Fan#: 84221
Location: IL, IL
What I Drive: '03 SVT EAP "Eurotrish"

Posts: 1,268
FF Reputation: 20 Sniper Focus Great Standing Member
Buy-Sell-Trade Rating: (13)
I'm getting ready to replace my rear bearings and I was wondering if I should replace those seals? It doesn't seem like most people replace those seals and I'm hoping mine will be good.

They're about $22 each from Tousley and rock auto... if their listing is correct.

Here's a pic of the seal # 1m514c006aa
http://www.focusfanatics.com/forum/s...6&postcount=64

And a list of more part #'s for whatever reason.
http://forums.focaljet.com/mk-i-susp...ml#post7802996

The stock photos for the Timken SL260005 looks correct, but its listed for the 09-11 cars.

edit: looks like they're different sizes

Quote:
TIMKEN Part # SL260005 More Info 1.555 in. Shaft Size; 1.800 in. Bore; 1.836 in. Outer Diam; 1.012 in. Width
Category: Wheel Seal

MOTORCRAFT Part # BRS94 {#1M514C006AA, 1M5Z1S175AA}
w/o Interactive Vehicle Dynamics 1.575 ID x 1.929 OD x 0.630 Width; Rear
__________________
'03 SVT EAP "Eurotrish Bennett"
Sniper Focus is online now  
    Reply With Quote
Reply

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:44 PM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information : Site Map

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.