Help datalogging AEM wideband
I have my wideband hooked up. I have my XCAL3. I have a correctly spliced firewire. I go to analog setups in the xcal3, choose analog 2, wideband, scroll down to AEM, select it. Then cancel to continue.
Hook everything up. Have about 12 PIDS chosen to monitor....including Analog 2. Start datalogging, but the analog 2 will only read between 2 and 4. This should be reading my wideband.
As a test, I unplugged the firewire and started to datalog again....and analog 2 didnt read at all....so I know its communicating with the wideband when it is hooked up.