Driver Door Handle Slack/Broken from Outside - Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum > Ford Focus Tech Discussions > General Technical Chat

General Technical Chat This section is for technical discussions relating to general maintenance, electrical issues, engine trouble, and recalls.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

Reply
 
Thread Tools Display Modes
Old 02-06-2013, 04:47 PM   #1
ClubFocus
Focus Rookie
 
Join Date: Feb 2013
Fan#: 109613
Location: Corvallis, OR
What I Drive: 2001 Silver Focus

Posts: 1
FF Reputation: 1 ClubFocus Good Standing Member
Buy-Sell-Trade Rating: (0)
Driver Door Handle Slack/Broken from Outside

Hi Everyone, I am new here, so please be kind!

I have a 2001 Focus sedan with manual windows and locks. My driver door handle has recently become slack for the first 1cm or so of "pull". In addition, when opening it from the locked position with the key, it fails to open, but I can still use the handle to open the door when I leave it unlocked. When I go out and about I still lock it, but when I return to my car I have to go around to the passenger side and not just unlock it, but use the internal handle to physically prop it open a crack before I go back around. Additionally, when I do open the door, the handle no longer returns flush back to its original position. I have seen some threads regarding this issue, but I didn't really get all the info I need.

I have tried using white lithium spray both in the keyhole and in the door latch that is exposed when opening the door. Aside from looking cleaner once finished, this didn't do anything to help the problem. It seems I will probably need to take off the interior door panel and look for some sort of part that may have A) broken B) become loose or C) fallen off inside the panel?

I tried using a set of hex allen wrenches on the little bolts, but none seem to fit. I have a power drill/screwdriver with heaps of attachments I have never used; maybe I need one of those or something more specific?

Any guidance, preferably with pictures, on how to fix this problem would be great. I'm particularly concerned with removing the panel since the side mirror seems to fit over that piece and I don't see a way to remove that. Also, the window crank seems like it will be an obstacle as well.

Thanks!


ClubFocus is offline  
    Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 02-06-2013, 05:01 PM   #2
toxic_waste
Focus Jr. Enthusiast
 
toxic_waste's Avatar
 
Join Date: Jan 2013
Fan#: 108848
Location: wellingborough, United Kingdom
What I Drive: 2003 focus st

Posts: 24
FF Reputation: 1 toxic_waste Good Standing Member
Buy-Sell-Trade Rating: (1)
you wont be able to use hex allen keys as the handle has torx head bolts holding it on, these are the star shaped ones, probably be best to get some before you start to take things apart.
one final thing when you undo the torx bolts which hold the handle on hold the handle from the outside as you undo them and once the handle is free stop turning the bolt because if it comes out from its housing it will fall into the door & be a p.i.t.a to find & get back out
toxic_waste is offline  
    Reply With Quote Quick reply to this message
Old 02-06-2013, 06:30 PM   #3
xxMichaelAnthony
Focus Fanatic
 
xxMichaelAnthony's Avatar
 
Join Date: Aug 2008
Fan#: 58459
Location: Orange County, CA, CA
What I Drive: 2001 CD Silver ZX3

Posts: 2,565
Points 15,496, Level 80
Points: 15,496, Level: 80 Points: 15,496, Level: 80 Points: 15,496, Level: 80
Level Up 30% Completed
Level up: 30% Level up: 30% Level up: 30%
Forum Activity 0%
Activity: 0% Activity: 0% Activity: 0%
FF Reputation: 20 xxMichaelAnthony Great Standing Member
Buy-Sell-Trade Rating: (3)
You will most likely need to replace the handle reinforcement. Little pot metal piece that pushes the latch rod down is know to break. Not to hard of a job but it is a tight space to work in. Part can be had from CFM http://focus.c-f-m.com/forddoorhandl...ocus00-01.aspx
__________________
http://effyeahfordcars.tumblr.com
[HOONIGAN]
iTroll
xxMichaelAnthony is offline  
    Reply With Quote Quick reply to this message
Reply

Bookmarks & Social Networks

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:10 AM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Audi S3, Ford Fusion and Acura TLX. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area. Challenger Hellcat - Charger Hellcat