2000 focus wheel bearing - Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum > Ford Focus Tech Discussions > General Technical Chat

General Technical Chat This section is for technical discussions relating to general maintenance, electrical issues, engine trouble, and recalls.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

Reply
 
Thread Tools Display Modes
Old 01-20-2013, 10:44 AM   #1
rbianca87
Focus Rookie
 
Join Date: Jan 2013
Fan#: 108508
Location: ravenna, OH
What I Drive: 2000 red SE

Posts: 9
FF Reputation: 1 rbianca87 Good Standing Member
Buy-Sell-Trade Rating: (0)
2000 focus wheel bearing

Hi I have a 2000 ford focus se. I need me rear wheel bearings. Would it be easier to replace the whole drum? Or the hub assembly? Also if I have abs is there anything important I need to know before replacing them? Thanks!


rbianca87 is offline  
    Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 01-20-2013, 10:52 AM   #2
05focusST91
Focus Addict
 
05focusST91's Avatar
 
Join Date: Feb 2011
Fan#: 83640
Location: Westchester, NY
What I Drive: 2008 chevy cobalt SS/TC.

Posts: 1,112
Points 2,793, Level 32
Points: 2,793, Level: 32 Points: 2,793, Level: 32 Points: 2,793, Level: 32
Level Up 29% Completed
Level up: 29% Level up: 29% Level up: 29%
Forum Activity 2%
Activity: 2% Activity: 2% Activity: 2%
FF Reputation: 6 05focusST91 Good Standing Member
Buy-Sell-Trade Rating: (1)
Yea its 10x easier to change the drum, also check your brake shoes when they're off, other than that its pretty easy
__________________
Funtion>form.
FLOOR IT!
2005 focus ST (gone)
Still here!
05focusST91 is offline  
    Reply With Quote Quick reply to this message
Old 01-20-2013, 10:52 AM   #3
rbianca87
Focus Rookie
 
Join Date: Jan 2013
Fan#: 108508
Location: ravenna, OH
What I Drive: 2000 red SE

Posts: 9
FF Reputation: 1 rbianca87 Good Standing Member
Buy-Sell-Trade Rating: (0)
New*
rbianca87 is offline  
    Reply With Quote Quick reply to this message
Old 01-20-2013, 10:56 AM   #4
rbianca87
Focus Rookie
 
Join Date: Jan 2013
Fan#: 108508
Location: ravenna, OH
What I Drive: 2000 red SE

Posts: 9
FF Reputation: 1 rbianca87 Good Standing Member
Buy-Sell-Trade Rating: (0)
Thanks! I'll look into doing that. Are there any how to videos? I have a Haynes manual would that take me through the whole process? I'm new to this lol
rbianca87 is offline  
    Reply With Quote Quick reply to this message
Old 01-20-2013, 12:52 PM   #5
whynotthinkwhynot
Captain TMI
 
whynotthinkwhynot's Avatar
 
Join Date: Jan 2005
Fan#: 18416
Location: the armpit of TN, Memphis, TN
What I Drive: 05 Focus Wagon; 13 C-Max SEL

Posts: 20,275
Points 27,590, Level 98
Points: 27,590, Level: 98 Points: 27,590, Level: 98 Points: 27,590, Level: 98
Level Up 24% Completed
Level up: 24% Level up: 24% Level up: 24%
Forum Activity 12%
Activity: 12% Activity: 12% Activity: 12%
FF Reputation: 270 whynotthinkwhynot Outstanding Standing Member whynotthinkwhynot Outstanding Standing Member whynotthinkwhynot Outstanding Standing Member
Buy-Sell-Trade Rating: (1)
The problem replacing the drums alone or the hub assembly without replacing the drums is that you have a 200 ft-lb nut to remove in order to get the drum off of the hub. If you have a long "cheater" bar, this is not much of a problem. The bigger problem is re-torquing that nut- now I am personally not afraid of over torquing something that needs to be torqued over 150 ft-lbs, especially in a position like this where the massive amount of torque is spec'd for the simple reason of insuring the nut is completely tightened.

If you remove the hub from the rear, then you only need to loosen 4 35 ft-lb bolts that hold the hub to the back plate. Now, if you choose to remove it that way, you must then loosen the 200 ft-lb nut off the vehicle- this is not easy, so remember to loosen the nut before you remove the hub from the vehicle.

If you are replacing the hub and drum at the same time, this is more expensive, but you can simply unbolt the old hub/drum, and bolt in the new one. You will still have to use a cheater bar to tighten down the nut on the new hub/drum to 200 ft-lbs, but that's it.

I would also recommend having some brake parts grease handy, and possibly shoes and a drum brake rebuild kit. That way you can replace the shoes and rebuild the drum brake assembly while you're in there. It is VERY wise to purchase the drum brake spring tool for $5. This is a $5 tool that can save you thousands in dental work because most people who do drum brake jobs with pliers end up chipping or breaking teeth out eventually.
__________________
Be eclectic.
---The Complete How-To Archive--

Moderating everything now, let me know if I can help.

Quote:
Originally Posted by the user formerly known as ZX3_Chick View Post
You're special aren't you.
whynotthinkwhynot is offline  
    Reply With Quote Quick reply to this message
Old 01-20-2013, 11:35 PM   #6
curtisparker82
Focus Jr. Enthusiast
 
Join Date: Jan 2013
Fan#: 108061
Location: huntington, WV
What I Drive: 2002 black zx5

Posts: 31
FF Reputation: 1 curtisparker82 Good Standing Member
Buy-Sell-Trade Rating: (0)
the rear wheel bearing is in the drum....i know you can get them from napa as a set...you'll need a 29-30 mm socket for the drum nut and a slide hammer to take the drums off...take pics so you know how it goes back together
curtisparker82 is offline  
    Reply With Quote Quick reply to this message
Old 01-21-2013, 12:38 AM   #7
jetrinka
Focus Fanatic
 
jetrinka's Avatar
 
Join Date: Mar 2007
Fan#: 45622
Location: Snohomish, WA
What I Drive: 88 5-speed XR4TI

Posts: 7,528
FF Reputation: 180 jetrinka Excellent Standing Member jetrinka Excellent Standing Member
Buy-Sell-Trade Rating: (6)
A pair of dikes works amazing for drum brake springs. And if your looking for a tool that works like a "spring tool", a long flathead screwdriver works the same way.
jetrinka is offline  
    Reply With Quote Quick reply to this message
Reply

Bookmarks & Social Networks

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:14 PM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Audi S3, Ford Fusion and Acura TLX. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area. Challenger Hellcat - Charger Hellcat