 |
 |
 |
||||||
 |
|
 |
||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
| Wheels, Tires, Brakes & Suspension - Sponsored By Tire Rack The place to go for answers on wheel types, tire sizes, suspension issues and more. Sponsored By: 
|
 |
 |
|
|
|
Thread Tools | Display Modes |
01-17-2013, 01:07 AM
|
#1 | ||||
|
APOCALYPSE DUDES
 
|
Are these wheels any good?
Theres not much stats on them but i thought maybe someone with more knowledge could help me .
http://detroit.craigslist.org/okl/pts/3512661316.html  If anyone has input it will be greatly appreciated . i would try to zoom into the sizing on the tires , but my computer is down , and i am on my cellphone :( . Thanks for the help guys Sent from my SPH-D710BST using FF Mobile |
||||
|
|
|
Advertisement
|
Remove Advertisements |
|
Focus Fanatic
Fan#: 1
|
|
|
01-17-2013, 10:29 AM
|
#2 | ||||
|
Love CA / Hate CARB
|
What do you mean by "good?"
__________________
"My yellow, in this case, is not so mellow" -Jimi Hendrix Focus Fanatics Extremely helpful people I made a haiku |
||||
|
|
|
01-17-2013, 11:45 AM
|
#3 | ||||
|
APOCALYPSE DUDES
|
Good , as in are they going to poke out , or rub . The guy who listed them left no info . and i was hoping someone would have more knowledge of these .
Sent from my SPH-D710BST using FF Mobile |
||||
|
|
|
|
01-17-2013, 11:51 AM
|
#6 | ||||
|
Love CA / Hate CARB
|
They appear to be MSR 043 16x7 et35. 7" wide with +35mm offset is a pretty flush wheel, but shouldn't poke out. If I were to get 7" wide wheels, I would want et35. You could get some rubbing without rolled fenders depending on how low you are. I ran 16x7 et40 on FRPP springs with no rubbing issues except at full lock.
__________________
"My yellow, in this case, is not so mellow" -Jimi Hendrix Focus Fanatics Extremely helpful people I made a haiku |
||||
|
|
|
|
01-17-2013, 12:07 PM
|
#7 | ||||
|
APOCALYPSE DUDES
|
Well im still at stock height lol . So i should be ok ? I do plan on going to svt springs and dampers , because from what i understand it still stays pretty high . I dont wanna put my car too low
Sent from my SPH-D710BST using FF Mobile |
||||
|
|
|
|
01-17-2013, 12:22 PM
|
#8 | ||||
|
Love CA / Hate CARB
|
You'll be "ok" in the sense that your car isn't going to fall apart. The stance might be a little aggressive for stock height, but will really pull the whole look of the car together when you go to SVT suspension.
On that note, if you're doing actual SVT suspension, you'll need the Massive Omni Kit to make the front struts fit your 06. That doesn't apply if you're simply getting the FRPP kit for 06-07.
__________________
"My yellow, in this case, is not so mellow" -Jimi Hendrix Focus Fanatics Extremely helpful people I made a haiku |
||||
|
|
|
|
01-17-2013, 12:27 PM
|
#9 | ||||
|
APOCALYPSE DUDES
|
My bad , this kit is what i meant for dampers http://focus.c-f-m.com/fordracingper...fordfocus.aspx
Sent from my SPH-D710BST using FF Mobile |
||||
|
|
|
|
01-17-2013, 12:29 PM
|
#10 | ||||
|
APOCALYPSE DUDES
|
These for springs http://focus.c-f-m.com/fordracingper...-07focus1.aspx
Wasnt thinking when i said svt lol . Sent from my SPH-D710BST using FF Mobile |
||||
|
|
|
|
|
| Bookmarks & Social Networks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 09:23 PM.
 |
|
 |
||
 |
|
 |