help with timing tensioner pulley (milled head .060)

[vortechzx3]

i just mill my head to .60 and my timing tensioner pulley its giving me problems. did i mill too much the head? thx

[whynotthinkwhynot]

I'm going to move this to "Focus Power"'s vendor page. 1turbofocus is the most qualified to answer this question.

Thanks for posting!

[vortechzx3]

thx !!!! i need help asap

[sleepyboy]

What kind of problem are you having?

[vortechzx3]

Its not adjusting.. And its moving alot and make sounds when the car is runnin

[sleepyboy]

Have tried retensioning it? Is the pulley itself moving or just the pointer?

[vortechzx3]

The pointer

[1turbofocus]

The pointer will be all over the place why the engine is running on some cars , some hold steady

Give me a call and lets go over a few things and steps and see if I can help then if we get it working you can come back and post about what you found

Tom

[sleepyboy]

What Tom said, as long as the pulley itself isn't moving you'll probably be fine. What ever y'all find out please post what happens so it can help others.

[vortechzx3]

The pointer moving its not what bad , when the pointer moved and sound the belt loss tension and the belt jump on the sprockets..