abs traction light on and brake when start moving
Decided to do my rear brakes, to make it easy, since i had to replace shoes and the drum too and went to orileys and got the drum with a wheel bearing and replaced it.
All i did is took the nut out, replaced the shoes, installed the new hub and voala for the drivers side. The pass side after taking the old drum out the black washer came out, so before the axle nut i put that washer and the tightened the nut. Started the car, and got all those light. I understand i messed something up with abs, and after looking at my old drums they have wheel bearing and and i guess the second is abs ring. and those new drums i think had only one, so only wheel bearing. Can anyone actually walk me through the process and if i actually have to get different drums press out the wheel bearing, do something with those abs rings or, in one of the threads, i read the abs unit itself might have died. What i should ?
any help is greatly appreciated