|
||||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
General Forced Induction The place to chat about turbochargers, superchargers and Nitrous systems.
|
![]() |
![]() |
|
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||
|
Focus Enthusiast
|
Point me in the right direction.
Drove my brother's GTI last week, it's got me lusting after some manner of boost for my SVT. It doesn't look like there are any *new S/C kits available these days...how about turbo? More expensive yes, but in the end it's probably better right? Does the Zetec FSwerks kit fit the SVT? Tom's turbo kit vs. the FSwerks?
I don't want to build the motor, and don't need/want 300 horsies...the goal would be to end up in the 225-250 range, comparable to a stock GTI. Point me in the right direction for research...there is a giant sea of info out there, and I'm not sure where to start. |
||||
|
|
|
|
|
Remove Advertisements |
|
Focus Fanatic
Fan#: 1
|
|
|
|
#2 | ||||
|
TURBO ZX3
|
Toms kit works fine as does the fswerks kit. But the other essentials you'll need aren't included. Such as wideband boost gage oil pressure gage injectors booost a pump.
__________________
FF MODERATOR RISE AGAIN EGGYOLK130 WHP 124 WTQ ZETEC CREW #271 RIFF CREW TURBO DYNO COMING SOON |
||||
|
|
|
|
|
#4 | ||||
|
TURBO ZX3
|
Ya buy a used kit. Here off of fanatics. That's your best bet. Its cheaper and a 100% full bolt and go kit. BUT you'll need an xcal 3 and a tuner such as Tom or Fasttuner aka fernando
__________________
FF MODERATOR RISE AGAIN EGGYOLK130 WHP 124 WTQ ZETEC CREW #271 RIFF CREW TURBO DYNO COMING SOON |
||||
|
|
|
|
|
#6 | ||||
|
( o Y o )
|
boost is addictive. and thats what the fswerks doesnt really support because it uses the stock zetec exhaust manifold. its a great kit, but you'll max it between 250 and 300whp due to flow limitations with that manifold depending on the turbo you choose (id say gt2871 or 28rs).
toms kit is good too. and top speeds is great if you want to shoot for 400+ whp.
__________________
|
||||
|
|
|
|
|
#7 | ||||
|
TURBO ZX3
|
But top speeds shit lately has blownwelds in their manifolds and it takes cl months to receive their kits
__________________
FF MODERATOR RISE AGAIN EGGYOLK130 WHP 124 WTQ ZETEC CREW #271 RIFF CREW TURBO DYNO COMING SOON |
||||
|
|
|
|
|
#8 | ||||
|
( o Y o )
|
i knew about the months to get stuff, but not the welds.
IF I ever build this car up for boost, I'm contracting a friend for his pretty custom work.
__________________
|
||||
|
|
|
|
|
#10 | ||||
|
FF Affiliate
|
Biggest thing is much less TQ then turbo and little room to grow , If you go with the PC step up to the larger blower unit , the unit that comes with the kit I have always said is to small and they do have a larger unit that makes more HP/TQ ar a less blower RPM
Tom
__________________
Focus-Power: Your #1 Source for Ford Focus Speed, Tuning & Performance! Customer Support AIM: hpdyno Email: tom@focus-power.com Phone: 704-249-3745 Site: focus-power.com Elder 1turbofocus |
||||
|
|
|
|
| Bookmarks & Social Networks |
| Thread Tools | |
| Display Modes | |
|
|
|
||||