SPC 81310 Camber Kit Question

[RSV 02 Focus]

Hi,

I'm a bit confused by what I'm reading in the product description for this "kit". From posts I've read here, it seems two bolts are required (1 kit) to replace the outer bolt of each upper control arm. When I called to order, I was told 1 "kit" per axle or a total of 4 bolts. Right now. the rear camber of the 02 Zetech I'm working is -2* left and -2.3* right and I want it set to -1.4* for both.

Could somebody clarify which is correct?

Thank you very much,

Roy

[Sponsor]

[Geezer]

Only one camber bolt per side in the rear is required. All the popular kits I have seen or bought contain two bolts...all that you need.

[RSV 02 Focus]

Originally Posted by Geezer

Only one camber bolt per side in the rear is required. All the popular kits I have seen or bought contain two bolts...all that you need.

That's what I thought but wanted to be sure. Thank you so much Geezer, I appreciate the help with this and the camber/toe issues I posted earlier.


Roy