has anyone done this yet?

[sam fisher]

Originally Posted by alaskanzx5

instead put some 8" subs and run them as mids. it would add good amount of depth if done right.

this seems like ur best option , itd be sweet if you did somethin with fiberglass tho

Sent from my N860 using FF Mobile

[popwarhomie]

Just seal that hole up, deaden it and get rid of those cheap 6x8s for a nice set of 6.5" components.

[alaskanzx5]

i would do a 8: sub run it as a mid and put a set of components upfront. set the crossover for the 8's at about 50hz up to 250hz set the mid for the component from 150hz to 3500hz then the tweet from the component from 3500hz up. a 4channal amp with the 2 8s bridged on the rear channel and the front component set wire to the front channel.

[Blue5ive]

Sounds interesting.

[sgtsmasher]

i thought so too thats why im interested in doing something, but idk

[sgtsmasher]

Originally Posted by Blue5ive

Sounds interesting.

i saw that you posted on my other thread, and you said something about doing a tool compartment...that would be a really really good idea for me as i have all my 1/2 and 3/8 flex bars and sockets on the floor behind my seat just chillen...a tool compartment would be ILL