Fog light mod not the hack - Focus Fanatics
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Focus Fanatics > Ford Focus Tech Discussions > General Technical Chat

General Technical Chat This section is for technical discussions relating to general maintenance, electrical issues, engine trouble, and recalls.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

Reply
 
Thread Tools Display Modes
Old 11-14-2012, 08:53 PM   #1
shonut
Focus Jr. Enthusiast
 
Join Date: Jan 2012
Fan#: 93533
Location: Kenosha, WI
What I Drive: '01 SE wagon, 05 ST, 94 SHO Gone

Posts: 36
FF Reputation: 1 shonut Good Standing Member
Buy-Sell-Trade Rating: (0)
Fog light mod not the hack

So, I did a boat load of research and figured out how to properly get the fogs to go on with parking lights and off with high beams. I searched the threads and found nothing like this. On my 05 ST the switch wire (pin 1(86)) on the relay for the fogs goes to the low beam relay. Which only allows the fogs to go on with the lows. This wire(green with red stripe) needs to be cut from low beam relay and have a female blade crimp connector installed. Now find the high beam relay and remove it, there are 5 pins on this relay with pin #4(87A) empty. This terminal is hot when the high beams are off and off when highs are on. You need to push the female blade connector into this slot. There is a lock tab in there that needs to be pushed out of the way to get the connector all the way in. keep pressure on connector and re-seat the relay.

To do all this you need to remove the battery so you can unmount the fuse/relay box that is under the hood. Separate the 2 halves of the box to expose the bottom side of the relays and the wiring. there is very little room to do this and you may want a 2nd pair of hands. If you have experience with automotive wiring it should take less than an hour.

** This is not a job for someone with little to no experience in automotive wiring.**

If anybody wants to do this and needs pics I can try to take some. But with the limited area to work in not sure how good they will be. It is a mess of wires in there.


__________________
In the words of the mighty Ron Kwak " A motor is just an air pump" but my favorite is "it just sucks, bangs and blows"
shonut is offline  
    Reply With Quote
Sponsored Links
Advertisement
 
Reply

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:41 PM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information : Site Map

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.