|
||||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
MK3 Focus The place to chat about general questions, window tinting, exterior body, interior and lighting upgrades for the third generation 2012-Current Focus.
|
![]() |
![]() |
|
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||
|
Focus Rookie
|
How to reset oil change pop up display
Hi, so I changed my oil myself but after 2 week, in the center screen I have a message at start up reminding me of the need for an oil change. Anyone know how to reset this. Thanks
|
||||
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 | ||||
|
Focus Enthusiast
|
Resetting the oil life monitoring system
1. Turn the ignition key to the on position. Do not start the engine. For vehicles with push-button start, press and hold the START/STOP button for two seconds without pressing the brake pedal. Do not attempt to start the engine. 2. Press both the accelerator and brake pedals at the same time. 3. Keep both pedals fully pressed. 4. After three seconds, the Service: Oil reset in prog. message will be displayed. 5. After 25 seconds, the Service: Oil reset complete message will be displayed. 6. Release both the accelerator and brake pedals. 7. The Service: Oil reset complete message will no longer be displayed. 8. Rotate the key to the off position. For vehicles with push-button start, press the START/STOP button to turn the vehicle off completely.
__________________
Current 2012 SEL 5 door w/Premium Package - April 2011 | 1957 Chevrolet 3200 - 2005 Past Rides 2000 F150 Sport 2000-2011 | 1988 Ranger XLT 4wd 1988 - 2000 | 1966 Mustang 1983 - 2008 | 1963 Ford Econoline Van 1979 - 1983 |
||||
|
|
|
|
| Bookmarks & Social Networks |
| Thread Tools | |
| Display Modes | |
|
|
|
||||