Having problems datalogging with SCT Livewire 9600
I've been trying to start datalogging for a week now, I had tom set up the datalogging for me last week and was able to datalog for at least 5 minutes straight. I needed to get another o2 sensor and fix my wideband gauge wiring before he could start tuning so i've been tackling that this week. I finally got the wideband hooked up correctly to where it matches the tuner and I finally got the right o2 sensor installed so I was going to datalog last night so I could send it to tom today.
Here is where I am experiencing a problem, one, it took me forever to get the livewire 9600 to connect to my computer this time, I had to unplug it and plug it back in like 10 times. Most of those times when I went to start the datalog it would just freeze until I unplugged it again and then it would say "device initialization failed". After like 10 minutes I finally got it to start a datalog and it only datalogged for about 30 seconds before it kicked the livewire off and came up with a "send error" and about 3 other error messages. I unplugged it and plugged it back in and tried again and once again it started to datalog for about 30-45 seconds before it would stop and kick the livewire out and come up "send error" with the same errors as before. I repeated this about another 2 or 3 times with the same results, only being able to datalog for about 30-45 seconds before it would reject my livewire and come up with "send error" and a few other error messages.
I took a screenshot of it last night but I forgot to save it before I unplugged my computer so i've lost it. If I can't get this issue resolved today I will try again tonight and save a screenshot of the error messages, maybe that might help explain the problem.
I'm not sure if its my livewire causing the problems or if its my computer, the only thing that has changed since the last time I was able to datalog was some anti-virus software on my computer, was thinking that could possibly have something to do with it but i'm not sure. If anyone else has had a similar problem or knows what might be going on any help would be awesome! I'm pretty much at a trial and error stage to get it to work, but I need it to work soon if I want to get it tuned up before autocross in a few weeks!