2.5d engine swap - Ford Focus Forum, Ford Focus ST Forum
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Ford Focus Forum, Ford Focus ST Forum > Ford Focus Tech Discussions > Engine & Transmission Swap

Engine & Transmission Swap The place to chat about any engine and transmission swap.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

Reply
 
Thread Tools Display Modes
Old 08-29-2012, 05:46 PM   #1
VillageT
Focus Enthusiast
 
Join Date: Mar 2012
Fan#: 97061
Location: South Lyon, MI
What I Drive: 2005 Silver ZX3

Posts: 78
FF Reputation: 1 VillageT Good Standing Member
Buy-Sell-Trade Rating: (0)
2.5d engine swap

Does anybody have any experience with installing a 2.5l Duratec in a 2005-7 Focus. I am thinking about a 2009 Escape engine. It looks like it would bolt up to the Focus mounts and the accessories should fit OK. I know I would have to change intakes (23D probably) as the 2.5 is drive by wire.

The issue that would seem to be a real problem is that this engine is a VVT and I would have to use a fixed cam arrangement as my processor won't handle VVT.


VillageT is offline  
    Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-29-2012, 07:07 PM   #2
VEGAS
Focus Enthusiast
 
VEGAS's Avatar
 
Join Date: Jun 2010
Fan#: 75680
Location: Las Vegas, NV
What I Drive: 2007 Focus

Posts: 537
FF Reputation: 4 VEGAS Good Standing Member
Buy-Sell-Trade Rating: (0)
it can be done, Turbo toms has experience with it, however it is not Plug and Play like a 2.3L
VEGAS is offline  
    Reply With Quote Quick reply to this message
Old 08-29-2012, 08:54 PM   #3
st12131
Focal Distortion
 
st12131's Avatar
 
Join Date: May 2010
Fan#: 74797
Location: North Las Vegas, NV
What I Drive: 2007, Huyndai, Santa Fe, GLS

Posts: 2,331
FF Reputation: 8 st12131 Good Standing Member
Buy-Sell-Trade Rating: (2)
I know I would love to do the swap myself in my 2010. If it were me I would get the 6 speed as well, being that you could get it in the fusion that way.

Sent from my SAMSUNG-SGH-I747 using FF Mobile
__________________
-Bob-
2012 F-150 EcoBoost 4X4 (work truck)
Focus S #1, Sedan Revolution #192, Rally Revolution #8, March 2012 SOTM
Focal Distortion, a Ford licensed club and FSC member.
Sgt, USMC (1999-2003)
st12131 is offline  
    Reply With Quote Quick reply to this message
Old 08-30-2012, 01:00 PM   #4
Fernando_221
Focus Enthusiast
 
Join Date: Oct 2010
Fan#: 79468
Location: Rio de Janeiro, Brazil
What I Drive: '06 ZX4 2.0L Dtec, '11 MK2.5 2.0L

Posts: 194
Points 1,709, Level 24
Points: 1,709, Level: 24 Points: 1,709, Level: 24 Points: 1,709, Level: 24
Level Up 9% Completed
Level up: 9% Level up: 9% Level up: 9%
Forum Activity 1%
Activity: 1% Activity: 1% Activity: 1%
FF Reputation: 3 Fernando_221 Good Standing Member
Buy-Sell-Trade Rating: (1)
Quote:
Originally Posted by VEGAS View Post
it can be done, Turbo toms has experience with it, however it is not Plug and Play like a 2.3L
why not? I have a 2.5 engine, block is the same as 2.3 but it's bored to 89mm.
I'm planning to do the swap next month. You can use th 2.0 or 2.3 head without vvt.
Fernando_221 is offline  
    Reply With Quote Quick reply to this message
Old 08-30-2012, 01:07 PM   #5
Chris_HT
Focus Addict
 
Chris_HT's Avatar
 
Join Date: May 2011
Fan#: 86229
Location: Houston, TX
What I Drive: Blue SVT 2002

Posts: 1,429
Points 1,526, Level 22
Points: 1,526, Level: 22 Points: 1,526, Level: 22 Points: 1,526, Level: 22
Level Up 26% Completed
Level up: 26% Level up: 26% Level up: 26%
Forum Activity 0%
Activity: 0% Activity: 0% Activity: 0%
FF Reputation: 4 Chris_HT Good Standing Member
Buy-Sell-Trade Rating: (2)
sounds interesting, ill keep an eye on this thread
__________________
Blue SVT 2002

Our Lady of blessed acceleration

Quote:
Originally Posted by Black&Tan View Post
But.... why read facts and investigate a claim when it supports your ideology?
...that should be written as 'The First Law of Internet Forums'
Chris_HT is offline  
    Reply With Quote Quick reply to this message
Old 08-30-2012, 01:13 PM   #6
Outlaw5.0
Focus Enthusiast
 
Join Date: Mar 2011
Fan#: 84300
Location: Canton, MI
What I Drive: 2011 Ford Focus SES

Posts: 405
Points 432, Level 8
Points: 432, Level: 8 Points: 432, Level: 8 Points: 432, Level: 8
Level Up 64% Completed
Level up: 64% Level up: 64% Level up: 64%
Forum Activity 1%
Activity: 1% Activity: 1% Activity: 1%
FF Reputation: 1 Outlaw5.0 Good Standing Member
Buy-Sell-Trade Rating: (0)
The 2.0 head will kill power for sure, the 2.3 head will probably hurt power also .
Outlaw5.0 is offline  
    Reply With Quote Quick reply to this message
Old 08-30-2012, 01:29 PM   #7
VEGAS
Focus Enthusiast
 
VEGAS's Avatar
 
Join Date: Jun 2010
Fan#: 75680
Location: Las Vegas, NV
What I Drive: 2007 Focus

Posts: 537
FF Reputation: 4 VEGAS Good Standing Member
Buy-Sell-Trade Rating: (0)
this was from Tom back in April

"I have made a prototype VCT Elim for the 2.5 now and working on making everything a bolt in for the 2.5L"

Also

"Ford 2.5 out of the Fusion is the best swap"


and this was also posted by someone else

"I believe the 2.5 comes standard with VCT. Which means you will have to get an ECU to go with the engine. And since it isn't in a Focus, that will make the swap even harder."
VEGAS is offline  
    Reply With Quote Quick reply to this message
Old 08-30-2012, 01:33 PM   #8
Top Speed
Focus Enthusiast
 
Top Speed's Avatar
 
Join Date: Aug 2010
Fan#: 77307
Location: Simpson, NC
What I Drive: 02 SVT, 07 ZX3, 04 Sedan, 02 ZX3

Posts: 455
Points 7,552, Level 58
Points: 7,552, Level: 58 Points: 7,552, Level: 58 Points: 7,552, Level: 58
Level Up 1% Completed
Level up: 1% Level up: 1% Level up: 1%
Forum Activity 0%
Activity: 0% Activity: 0% Activity: 0%
FF Reputation: 3 Top Speed Good Standing Member
Buy-Sell-Trade Rating: (0)
I have one in my car right now.
Top Speed is offline  
    Reply With Quote Quick reply to this message
Old 08-30-2012, 01:35 PM   #9
VEGAS
Focus Enthusiast
 
VEGAS's Avatar
 
Join Date: Jun 2010
Fan#: 75680
Location: Las Vegas, NV
What I Drive: 2007 Focus

Posts: 537
FF Reputation: 4 VEGAS Good Standing Member
Buy-Sell-Trade Rating: (0)
i seen your thread with the 2.5L but your install is extreme

http://www.focusfanatics.com/forum/s...t=2.5L+Duratec
VEGAS is offline  
    Reply With Quote Quick reply to this message
Old 08-30-2012, 01:51 PM   #10
Fernando_221
Focus Enthusiast
 
Join Date: Oct 2010
Fan#: 79468
Location: Rio de Janeiro, Brazil
What I Drive: '06 ZX4 2.0L Dtec, '11 MK2.5 2.0L

Posts: 194
Points 1,709, Level 24
Points: 1,709, Level: 24 Points: 1,709, Level: 24 Points: 1,709, Level: 24
Level Up 9% Completed
Level up: 9% Level up: 9% Level up: 9%
Forum Activity 1%
Activity: 1% Activity: 1% Activity: 1%
FF Reputation: 3 Fernando_221 Good Standing Member
Buy-Sell-Trade Rating: (1)
Quote:
Originally Posted by VEGAS View Post
this was from Tom back in April

"I have made a prototype VCT Elim for the 2.5 now and working on making everything a bolt in for the 2.5L"

Also

"Ford 2.5 out of the Fusion is the best swap"


and this was also posted by someone else

"I believe the 2.5 comes standard with VCT. Which means you will have to get an ECU to go with the engine. And since it isn't in a Focus, that will make the swap even harder."
You can throw a set of stock cams and pulleys (after market/stock cams from head without vct) and keep the vct solenoid unplugged. The 2.5 head accepts non-vvt cams, but vvt will not work, if you don't care about vvt no problem.
This is what I'll do. I can post some pictures of the 2.5 block.
Fernando_221 is offline  
    Reply With Quote Quick reply to this message
Reply

Bookmarks & Social Networks

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Ford Focus Forum, Ford Focus ST Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:19 PM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.