|
||||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
SVT Performance (2002-2004) The place to chat about any 2.0L SVT DOHC Zetec engine performance, tuning and exhaust related upgrades.
|
![]() |
![]() |
|
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||
|
Focus Rookie
|
Svt short ram intake?
Has anyone ran the weapon r "secret weapon" intake on their svt?
If so, tell me what you think. What short ram do you find best for the svt? |
||||
|
|
|
|
|
Remove Advertisements |
|
Focus Fanatic
Fan#: 1
|
|
|
|
#2 | ||||
|
Focus Enthusiast
|
I have the K&N Typhoon short ram and I really like it. The car feels a little bit "torque-ier". There is a really nice growl added to the intake sound.
I can't speak for this weapon r short ram but I am sure it will give similar results. -sbc
__________________
2003 SVT focus Pitch Black Blue Interior Build number: 61 of 3985 Assembled January 23, 2003 |
||||
|
|
|
|
|
#3 | ||||
|
Focus Enthusiast
|
If you like a louder sound, just remove the little snorkel on the drivers side of the air box, other than that short rams have no other benefit and will only cause bogging when it's warm. Dyno test have proved over and over that the Cosworth engineered intake is about as good as it gets for these cars!
Good luck...
__________________
CD Silver 02 SVTF, #1336, Tom's Tune, K&N Panel, Steeda 8mm, Powerslot w/Hawk HPS & Steeda STS "Brace for the G's, and fast heel-toe work!"- Hunter S. Thompson |
||||
|
|
|
|
|
#4 | ||||
|
VEKTOR PLATE
|
yes if you want sound pull the side snorkel and toss in a better flowing panel filter. anything else is pretty much a waste.
__________________
bravery, its a bit like madness.... |
||||
|
|
|
|
|
#5 | ||||
|
Focus Jr. Enthusiast
|
Biggest gains in air temperature are from removing the hump on the front shroud before the snorkel. Having it there is a holdover from stock, where it improves mileage by keeping the air intake warm due to the radiator being right there.
Source: http://www.focusfanatics.com/forum/s...ad.php?t=10125 |
||||
|
|
|
|
|
#6 | ||||
|
I drive this!
|
Actually, the debris hump was kept in place and the area between the hump and snorkel was cut out.
__________________
"When does the zetec kick in" Asked by a Honda enthusiast |
||||
|
|
|
|
|
#7 | ||||
|
Moderator OF DOOM
|
Honestly, stick with the stock and just toss a good filter in it. It will sound a bit nicer, and wont be affected by heat-soak as much as a short ram.
__________________
▲Socal Crew #70 ▲ Hatch Nation #70 ▲ HOTM Jan '12 ▲ '02 CD Silver SVT Turbo ▲ Build # 445 Moderator For: Socal Fanatics | SVT Focus | Mk1 Focus | Audio & Electronics | General Chat |
||||
|
|
|
|
|
#8 | ||||
|
Focus Enthusiast
|
I recently got the K&N Typhoon SRI installed and I rikey! The heat soak thing everyone is stating can be avoided if you have the cash to ceramic coat your stock header's combined with heat wrap to reduce under hood temps.
SRI - less bends/less restrictions. Air is similiar to water in that it will go down the path of LEAST resistance. ;) *Also, I am picking up my CFM 67MM throttle body today! =o SRI is king. Last edited by _Auricom_; 09-11-2012 at 01:19 PM. Reason: too many typo's noob |
||||
|
|
|
|
|
#9 | ||||
|
VEKTOR PLATE
|
^^ sorry but no. all you have picked up is sounds. its been proven on dyno's with the svtf that cai's or sri's really dont do much.
jsut becasue your ssri has one bend. it still has to draw air from over the transmisson, under the battery box, around the hood edges nearby, etc. the stock svt airbox essesntially has 3" piping anyways
__________________
bravery, its a bit like madness.... |
||||
|
|
|
|
| Bookmarks & Social Networks |
| Thread Tools | |
| Display Modes | |
|
|
|
||||