Question about these AEM to Your SCT flasher threads

[blackfocus2k4]

So i am seeing all these threads about the SCT flasher to your AEM wideband gauge. I am about to do an JRSC install and one of the things i have to install is a wideband AEM will i have to do something with the gauge to use the flash device with it. my plan is to either have tom do a remote tune or find a shop in central florida to do the Dyno and tune??

[Sponsor]

[crzyclown]

What flasher are you using? You need to hook the wideband up so the tuner can see the A/F ratio. There's a good write up on here, which I'll look for in a sec, that shows how to wire your Wideband to your Livewire. It was really simple to follow. I'll post the link when I find it.

[crzyclown]

It's actually a sticky in the tuning forum, the first one actually. here's the link any how

http://www.focusfanatics.com/forum/showthread.php?t=224269

[blackfocus2k4]

i plan on getting the SCT tuner from either CFM or Tom, and the AEM wideband tuner