For Sale: 2000-2011 Trunk and Hatch LED conversion kits

[Baldurs390]

can the wireless kit go in the interior?

[VonKrause]

Absolutely, basically all the wireless thing is is a couple of switches that you wire your LEDs to and can then turn them on or off with the wireless key fob. I have my interior and my grille LEDs set up on them. I don't have a kit for the interior but I can send all the things for a DIY kit for the interior. For the stuff without the switch it's $44 and then the $42 for the wireless switch.

-VonKrause-

[VonKrause]

Weekend bump.

I am getting supplies tomorrow if anyone is interested.

[MorganR715]

If your still taking orders I'll take a set of blue trunk for my 2002

[VonKrause]

Originally Posted by MorganR715

If your still taking orders I'll take a set of blue trunk for my 2002

You are in luck I do have the mats to make one, PM incoming!

[MorganR715]

Awesome, thanks so much! Looking forward to it!

[johnriii44]

Out of curiousity, any developments on the plug and play connectors? Also, does anyone have any pics of the locations and brightness of the white in a zx3 w/o sub? I may be interested in a set, but I'd rather not have to splice the wires.

[VonKrause]

The plug and play adapters that I bought have not gone well, I ordered them almost a month ago and according to them were delivered on the 19th of June. Well that didn't happen and now I am battling them over it.

Don't have a picture for zx3 with the white in it yet, want one but haven't sold a white ZX3 kit yet. Oddly white is the least sold kit I currently make, I sell blue the most then red.

One thing I saw people doing was just splicing into the wires instead of flat out removing the stock bulb socket, the guy with the blue SVT kit is planning on putting a wedge LED bulb in the stock housing in addition to the kit.

-VonKrause-

[johnriii44]

I see. I found a 194 adapter that comes with removable 12" pigtails that you just snap onto the bulb for 2.99 here: (http://autolumination.com/connectors.htm) about halfway down the page. Probably order one if I get a kit.

How do you have the wire/light setup in the zx3? Two on either side? Any on the bottom center below where the latch hooks?

Thanks and sorry for all the questions lol.

[SvviftSVT]

Originally Posted by johnriii44

I see. I found a 194 adapter that comes with removable 12" pigtails that you just snap onto the bulb for 2.99 here: (http://autolumination.com/connectors.htm) about halfway down the page. Probably order one if I get a kit.

How do you have the wire/light setup in the zx3? Two on either side? Any on the bottom center below where the latch hooks?

Thanks and sorry for all the questions lol.

that connector is similar (sans the pigtail prewired to it) and i know he has the kits for the sides. i can work with him on the ones near the latch hook because that is how i did mine. we both had similar ideas and he is the one that started this.
i will be meeting up with him this weekend, if not before. so we will keep you posted.

his kits work for the sides (near the glass) but this is how i expounded upon them

there are two facing the back of the seats on the latch hook area... then i have 2 on the back of my subs.

that is def more of a custom job, but i am sure justin will be able to do what he can to help you out.