Dominic Biro / Dominanteng.com

[BnzRed1]

Guess you never had anything back ordered.. selling used parts and "middle man" mass produced parts is somewhat different than a small "one man fabrication" shop. He does use a secondary business to powdercoat, so there is time involved in both fabrication and finish, and like you and I he has a life and a job. I'm retired so forget the job part in my case. I have placed orders from many different parts merchants, including some of the sponsors here and have gotten the dreaded "order delayed" or "temporarily back ordered", "out of stocked", etc. The days of stockpiled inventories are long gone, it just doesn't make sense for any business to maintain a large, very taxable inventory that may never be sold, so now we have limited production small inventories. I don't think that Dom is any different and that his small side business (products) are built on a demand basis. I ordered parts from Dom and yes it took some time,but the wait was worth it, the parts are amazing and would order from him again..scratch that I will order from him again. I understand "custom" fabrication and about having a life..

[NX_Focus]

how does anyone get a hold of dom? i wrote him wednesday this week & today. i ripped my bushing out of my lower rear arm trying to put new springs in. i want to see about getting a set of his arms. but can not wait weeks to get a reply. if i not hear from him tonight i guess i will be getting a stock arm.

[NX_Focus]

has any one try to replace the rear lower bushing? i can not find them at any auto store. but found on ebay

http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_1842wt_952

[Blue5ive]

I will be ordering from Dom after I get my coilovers. I unlike some others have researched his product and am aware of the delays that may arise and I know communications with him can be drawn out. I already know what to expect and I know what custom work involves. Not to mention the orders that will be ahead of mine. His quality is the best out there and imo worth the waite. If you don't want to deal with possible delays or the frustration that may arise trying to communicate with him then don't order.

Donald

[NX_Focus]

i like his work as well. but i can not wait to get rear lower arm on my car. i need it back on the road. so guess i will be going with the svt lca. i need to get it back together to get to paint shop before FF11. oh also got to shop for my tune do to my mods. i wrote him 3 times in 5 days

[Blue5ive]

I emailed him once and got a reply the next day. Next time I emailed him it took a little over a week to get a reply. Good luck with your mods.

[felixthecat]

Originally Posted by NX_Focus

how does anyone get a hold of dom? i wrote him wednesday this week & today. i ripped my bushing out of my lower rear arm trying to put new springs in. i want to see about getting a set of his arms. but can not wait weeks to get a reply. if i not hear from him tonight i guess i will be getting a stock arm.

Wouldn't it be simpler to get a new or used arm, than trying to get & put a bushing in? Have you checked poly bushing's? Howd you rip your bushing adding new spring's? I just remove the 17mm lower shock bolt & the 17mm bolt holding the lower arm on to the trailing arm & don't forget to undue your sway bar end link's too. Then your lower arm swing's down w/ the spring=simple!

[NX_Focus]

Originally Posted by felixthecat

Wouldn't it be simpler to get a new or used arm, than trying to get & put a bushing in? Have you checked poly bushing's? Howd you rip your bushing adding new spring's? I just remove the 17mm lower shock bolt & the 17mm bolt holding the lower arm on to the trailing arm & don't forget to undue your sway bar end link's too. Then your lower arm swing's down w/ the spring=simple!

well i was putting my FRPP lowering kit on. did front, then went to rear. got leaft on. as i was trying to remove the right bolt to lower the arm so spring would fall out. it ripped up the bushing & got stuck. i had to cut the bolt on both sides of the arm to get the spring out. yes i was looking at getting bushing till i read a bunch on line. so i wrote tously ford to get the svt lca arms. was going to go with dom arms but can not get him to call or write back. i can not wait weeks & weeks to get them.

[FocusRacingAustrali]

So whatever happen to this joker???? still in business

[NX_Focus]

yea still around. Still big into his bmx freestyle shows & building for others.

http://dominanteng.com/
-------------------------------------------------------------------------------
price of LCA on 12/13/11

HI, the front LCA set is $500 including the rear brackets for the bushing. I can powdercoat them any color you want. Shipping runs about $15

-Dominic
-----------------------------------------------------------------------------
info from 6/3/11

Here is a current price list:

Front LCA $450 + ($50 for optional rear bushing brackets)
Front Swaybar Links $100
Rear LCA $380
Rear Camber arm $180
Rear toe link $160
Rear Chassis Brace $250


Lead time varies on how long the powdercoating shop takes. Any cool & included in cost

-Dominic