The Duratec Sparkplug Sticky - Focus Fanatics
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace



Go Back   Focus Fanatics > Ford Focus Second Generation > DURATEC Performance (2008-2011)

DURATEC Performance (2008-2011) The place to chat about any Duratec 20 engine performance, tuning and exhaust related upgrades.

Search This Forum | Image Search | Advanced Search    
FocusFest Ford Focus Tire & Wheels FocusFanatics Merchandise

Reply
 
Thread Tools Display Modes
Old 02-23-2011, 06:53 AM   #1
wickedgreyzx3
Focus Fanatic
 
Join Date: Apr 2006
Fan#: 34204
Location: Cleveland, OH, IN
What I Drive: 2006 ZX3 Liquid Grey

Posts: 2,580
FF Reputation: 17 wickedgreyzx3 Great Standing Member
Buy-Sell-Trade Rating: (2)
The Duratec Sparkplug Sticky

There is too much confusion and misinformation out there, so I'm going to simplify everything.

First off Here's a quick do and don't use
Do Use
OEM Plugs from the dealer
Autolite, "coppers"
NGK "coppers"
Don't Use
Anything made by Bosch
Designer plugs
Autolite Platinums

Secondly, I'm not going to touch Forced Induction, Nitrous, or 30+ hp gains

I'm going to base this off my 2006 D20 (vin N) non p-zev.

The Focus comes with "Motorcraft" Spark Plug made by NGK.
Yours may have come with a DOUBLE PLATNIUM plug.
The reason your Focus came with this type of plug is for 1 reason only. THE BEST SPARK OVER THE LIFE OF THE PLUG it is a tricky play on words but just read it it seems simple enough. They're not making any claims beyond long life. You can expect 80-100,000 miles out of factory plugs.
www.fordparts.com offers the OE replacement for $18.19


There are a few different options available out there. Other manufactures who make a factory replacement, there are cheaper options, and then there are designer plugs.

I'm not going to touch on the designer plugs because if it's too good to be true...

I will say that the Bosch +2 and +4 work wonders, on BMWs from the late 1990's to the early 2000's. BMW contracted Bosch to come up with a plug to help clean up emissions. Bosch, like any smart company decided well heck, we can make a fortune off this. However, BMW stopped using these around 2005 when they released their "N" generations engines. Now BMW only uses Bosch spark plugs in a 1 or 2 engines.

The bottom line is Bosch +2 and +4 plugs will never perform the way they were intended on any car other than what they were designed for.

To begin with there are many companies making a good double platinum spark plug, but I will say that with the double platinum spark plugs that modern cars are designed so tight that you really need to stick with the original manufacture of the plug to have the car running right. There is no government control over the spark plug industry and the thickness of the platinum from manufacture to manufacture is going to vary.

Now onto replacement options.

You're first replacement option is to replace the spark plugs with the ones it came with. In my previous rambling, as mentioned you really want to go with the plugs from the Dealer, yes I know it sucks. But when playing with platinum you're just that, playing. You can try the replacement plug from NGK in the NGK box, but you really don't know if you're getting their 100% quality. If you go to the dealer and buy them in a Motorcraft box you know for 100% fact you are getting the spark plug designed by NGK for Ford. Unless your parts guy is an idiot and there are a lot of them out there, so do your research and ALWAYS ALWAYS ALWAYS go into the parts counter with your vin#.

You're second replacement option is to go with an iridium plug. Iridium plugs have not been around that long, and were introduced to make the longevity of the plug last to a true 100,000 miles. I think we all know someone with 80,000 miles on there vehicle with double platinum plugs and it started running like crap, and the plugs were just worn out.
In my opinion, iridium plugs push the line of designer spark plugs, and only reason I included them is becasue, there are a few manufactures using them now.

Now onto the confusion. Copper spark plugs.

To begin I will only be covering Autolites, however NGK makes a quality "copper" plug as well.

Why copper?
Copper conducts electricity much better than anything else on the market.
Why not copper?
It's life is about 1/10 that of a platinum plug HOWEVER at 1/10th the price, you do the math, if you're time and labor are free you're not really losing anything in the end.

All copper plugs from Autolite, are part #'s A### OR AR###
That's it, if it says AP it's not, if it doesn't have an "A" or an "AR" infront of the part number it's not copper.
We have 3 choices when it comes to copper
The Autolite A104
The Autolite A103
The Autolite AR103

I will breifely touch on gapping after this next rambling.
I always gap my D20 non pzevs at .055"

The A104 is of the factory Heat range, it is considered a replacement plug. You may or may not feel a gain with this, but you will feel your vehicle idleing smoother and possibly a decrease in fuel consumption.

The A103 and AR103 are a heat range lower.

A lower heat range works by allowing the heat to dissipate faster across the spark plug. This is benificial to us.

The advantages of a lower heat range:
lowered combustion temps
lowers chance of pre-detonation
burns fuel more completly, this is the one that makes us power and decreases fuel consumption
lowered emissions
The disadvantages:
There is a higher chance of the spark plugs to become fouled because it is cooler and if you have OTHER ISSUES SUCH AS LEAKING INJECTOR, it's going to cause the electrode to get wet and it will never get hot enough to burn that wet fuel away. If you're fouling a 1 step colder range on your focus, you have other issues going on.

First the A103, a good plug you will notice results from this. Your car wil be quicker, it will idle better and you're fuel conspumtion will decrease.

The AR103 is identicle tot he A103, but it has a groove cut in the electrode and the electrode is nickle plated. It is also way more electro magnetic interferance resitant than any plug out there, which is not benificial to us using coil on plug, but still nice to know if there is ever an EMP attack our spark plugs will still be ok. lol The AR103 will be less prone to fouling and carbon build up, which may results in a little longer life. But the big thing for us is the groove cut in the electrode, the idea behind this is to make a wider flame front and it works well and will make 5hp over stock plugs on a stock car.

On to life and gapping.

If you gap the spark plug to the factory recomendation of .050" you should see 30,000 miles from them, however reducing the gap will reduce your hp gains, as you want the spark to jump as far as possible without extinguishing it's self to create a better flame front.

If you gap the spark plug to .055" you should see 15,000 miles. This is the best compromise in my opinion. The gap make the spark huge and will give you a much improved gain over stock.

You can also gap to .060" however I do not recommend this unless you keep a set of hand tools in your car. This will make a very nice gain, however life until the gap becomes to large is very short. When I ran .060" I swear it felt so much better and was getting around 38mpg highway. However, after 8,000 miles started to misfire. and when I checked the gap they had grown to .062" and i guess .062" is just to much for the coil on plug to handle.

Conclusions
If you want longeveity, go to your ford dealer and suck it up and buy the OE plugs
If you want more power and better fuel consumpion, go with the A103 (or AR103 if you can find them)

Hope you enjoyed. Any questions feel free to PM me.


__________________
Modifying cars is retarded. Buy a bike instead.
wickedgreyzx3 is offline  
    Reply With Quote
Sponsored Links
Advertisement
 
Old 02-23-2011, 07:32 AM   #2
Jgrove998
i <3 my ST
 
Jgrove998's Avatar
 
Join Date: Mar 2007
Fan#: 45311
Location: Sykesville, MD
What I Drive: '12 Fusion SE V6

Posts: 2,419
FF Reputation: 24 Jgrove998 Great Standing Member
Buy-Sell-Trade Rating: (13)
Good info.

I used Autolite 104's when I was NA and now use 103's with the boost.


When I go to the parts store; I DO NOT tell them what car it is for. I simply ask them, "Can I get the 4 pack of Autolite 103's (or 104's)?" No questions asked; I don't let the guy tell me whats best for my car.
__________________
2012 Fusion SE 3.0L V6
'86 XR4Ti ; 2.3L Turbo, 15psi
1988 F150 Custom
'07 ST ; formally bewst'd - R.I.P
D23 Crew: #07
Jgrove998 is offline  
    Reply With Quote
Old 02-23-2011, 08:07 AM   #3
CamoCustom
Focus Addict
 
CamoCustom's Avatar
 
Join Date: Sep 2010
Fan#: 78390
Location: Port Richey, FL
What I Drive: 2011 Mazda 3 iTouring 2.0

Posts: 735
FF Reputation: 2 CamoCustom Good Standing Member
Buy-Sell-Trade Rating: (2)
Wow, that really does clear all the info up, and is all in one spot. perfect descriptions, I now understand heat range on spark plugs

+rep!
__________________
"A country boy can survive"
'11 Mazda 3
CamoCustom is offline  
    Reply With Quote
Old 02-23-2011, 12:53 PM   #4
J-Town_2006ZX3
Focus Enthusiast
 
J-Town_2006ZX3's Avatar
 
Join Date: Aug 2010
Fan#: 77950
Location: Jackson, MI
What I Drive: 2006 ZX3 R.I.P.-Currently 02'zx3

Posts: 359
FF Reputation: 3 J-Town_2006ZX3 Good Standing Member
Buy-Sell-Trade Rating: (0)
Wicked, I just started clapping in my cubicle as I finished reading this thread. Your information has greatly sorted this out. I need to explain my clapping to them now.
J-Town_2006ZX3 is offline  
    Reply With Quote
Old 02-23-2011, 01:09 PM   #5
DarkSpork
Focus Enthusiast
 
Join Date: Dec 2010
Fan#: 81461
Location: Central Coast, CA
What I Drive: 2013 VW GTI

Posts: 222
FF Reputation: 1 DarkSpork Good Standing Member
Buy-Sell-Trade Rating: (0)
I'm sorry if this is a stupid question, but was your note on gapping for the copper plugs or platinum plugs? If it was about copper plugs, would a larger gap on platinum plugs yield similar gains?
DarkSpork is offline  
    Reply With Quote
Old 02-23-2011, 01:12 PM   #6
RXTurner21
Focus Addict
 
RXTurner21's Avatar
 
Join Date: Oct 2010
Fan#: 79216
Location: Waterford, MI
What I Drive: 1987 Toyota Supra, 2004 ZX3

Posts: 641
FF Reputation: 3 RXTurner21 Good Standing Member
Buy-Sell-Trade Rating: (0)
Sorry if this is a dumb question but is that gapping recommendation applied to all of the plugs including the AR103?
RXTurner21 is offline  
    Reply With Quote
Old 02-23-2011, 01:24 PM   #7
jnagy8
Focus Enthusiast
 
jnagy8's Avatar
 
Join Date: Apr 2008
Fan#: 54937
Location: Michigan, United States
What I Drive: 2007 black focus zx3

Posts: 148
FF Reputation: 1 jnagy8 Good Standing Member
Buy-Sell-Trade Rating: (0)
thanks for taking the time to write this up. good info!
__________________
Team duratec #178
Hatch Nation #37

"How do you make a small fortune working on cars? Start with a big one.."
jnagy8 is offline  
    Reply With Quote
Old 02-23-2011, 02:18 PM   #8
S0C0nFused
Focus Fanatic
 
S0C0nFused's Avatar
 
Join Date: Sep 2006
Fan#: 39405
Location: Saint Louis, MO
What I Drive: 2007 TorD-Red ZX5 SES

Posts: 3,351
FF Reputation: 77 S0C0nFused Excellent Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by DarkSpork View Post
I'm sorry if this is a stupid question, but was your note on gapping for the copper plugs or platinum plugs? If it was about copper plugs, would a larger gap on platinum plugs yield similar gains?

If I may. Actually, it's not a stupid question. The answer is > it was tried. The result was less or same power due (it is believed) to be the nature of how a plat or iridium plug 'creates' the flame kernel (i cannot recall all the detail. sorry). the key is the electrode size, and is the reason they have to use rare earths (heat and wear). There is a vid on the net (somewhere) using a highspeed camera that shows the diffs. I have no idea where it is though anymore.
This is an area with a lot of conjecture. If you find the vid, watch and make your own conclusions.
__________________
Steeda SRI w/CAI intake. Trubendz SS 2.5" . FR Susp/Struts. Tune by Tom (FocusPower). Rota Grids. SAP rear spoiler. Custom front air dam, rocker panel bits and Rear valance.
Last of the Hatches #28
S0C0nFused is offline  
    Reply With Quote
Old 02-23-2011, 02:45 PM   #9
1bille1
Focus Enthusiast
 
Join Date: Jan 2011
Fan#: 82596
Location: poway, CA
What I Drive: 2000 black zts

Posts: 222
FF Reputation: 1 1bille1 Good Standing Member
Buy-Sell-Trade Rating: (0)
http://www.nology.com/silver.html

All this sparkplug talk, recently, jogged my memory regarding SILVER spark plugs.

SIlver is the best conductor- bar none.
Opinions????
1bille1 is offline  
    Reply With Quote
Old 02-23-2011, 02:48 PM   #10
10SES
Focus Enthusiast
 
Join Date: Nov 2010
Fan#: 80553
Location: coventry, NY
What I Drive: 2010 Silver SES

Posts: 86
FF Reputation: 2 10SES Good Standing Member
Buy-Sell-Trade Rating: (0)
great write up!--unless anyone knows any different, i should still see the approx. 5 hp gain even with my pzev if i switch to the 103's as well?
__________________
20% tint all around,5%visor,2.5"trubendzSS,K&N,debadged,etc.
10SES is offline  
    Reply With Quote
Reply

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:50 PM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information : Site Map

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.