Parting out SVT Engine!!!

95bstallion · 10-16-2010, 06:52 PM

This engine snapped an intake spring on cylinder 4 and the piston came up and jammed the valve into the head. The head is toasted, but no damage was done to the cams what so ever because it jammed the valves. All of the damage was done to the head and the piston. I had an engine builder come down and expect the block and he believes bore 4 will be ok with .020 , but . 030 will be the best option.
I will have 14 springs, all of the lifters, cams, 6 intake valves, 8 exhaust valves, sprockets etc. Make offers!

I will ask 100 obo for the block I do not knows it worth

I have 3 pistons and rods for 80 obo for all of them.

I will have to get the crank checked out before I can safely list it.

I will sell the crank, pistons, block for 150 as a combo.

SVT valve cover with spark plug cover for 25 obo, not perfect condition, but ok. (sold!)

Dual stage intake 50 obo

Injectors + fuel rails w/ electronic fuel pressure regulator 75 obo.

I will have a full wiring harness for 50 obo

SVT focus header w/ bolts 60 obo (pending)

Front accessory brackets with all accessories! make offers!

Throttle body 25 obo

SVT computer 30 obo

SVT MAF 30 obo

I am not parting out a whole car I just swapped a new engine into it!
Make me any reasonable offer because if you don't buy them they will go to the junk yard! I can take pictures and I usually have good shipping prices.