svt jrsc

[egman2005]

The pulley on my jrsc needs to be replaced. The key / keystock wore a large grove in it.

So can the old one still be used just machine a new grove?
And for the key / keystock what's gotta be done for this?

Thanks in advance

[Sponsor]

[CarDemon]

If the stock pulleys on the 45 and the 62 are the same, you can have mine. I'm not using it.

[mlbbaseball]

the stock pulley on the m45 is actually the bbk for the m62!!

[disciplerocks]

I posted in another thread, not sure if it was yours. I have a stack of pulleys if you need one. 2.5", 2.6", 3.0", and 3.6". PM me.
Posted via FF Mobile

[egman2005]

Ok,

I need to replace the belt now since im doing this. Dont feel like trying to match up the size

here is the number that i found for it while searching
Belt # is 6PK2705

Now is that a 106.5 " belt for the jrsc with the standard 3.6" pulley?

bc only thing i found looking on here is the BBK pulley size

[PumkinSvt]

i used the 106.5 with my bbk set up

[egman2005]

ok. so its def not for the standard kit then..... great. now i just need to find out what the standard size is. sounds like ill be trying to compare the belts tomorrow at the store unless someone knows the non BBK size

[disciplerocks]

So was that the wrong pulley then?

[PumkinSvt]

disciplerocks whats the smallest pulley do you have?

[disciplerocks]

Not really wanting to part with any more.