SVT Block and LUK replacement Clutch+flywheel

Wagamos · 04-16-2010, 09:42 AM

Just the block had about 80k on it. Has been rebuilt once, bore is clean without a ridge. The current bore is .020" or 50mm over. Has the oil squirters in it. Crank and pistons/rods are junk. I was not gonna ship the crank and Im only able to use 1 of the rods for my build.

Block 125 OBO Pictures up later today of it.

I also have the luk replacement clutch+pressure plate and flywheel. Sells for around 520 on cfm. http://focus.c-f-m.com/lukreplacemen...dfocussvt.aspx

All you would need is a new slave and then you would be good to go. Slave costs about 150 from tousley.

Clutch is used but has plenty of life left so Id let that and the flywheel go for SOLD. Seriously obo I dont have an svt trans so I dont have a use for it and Id like someone to be able to use it. I also have the flywheel bolts if you need/want them. The plus side to this is that you wouldnt have to have a break in time for the flywheel and clutch b/c they have already been run together.

CLUTCH IS SOLD.

Sponsor · Advertisement

Wagamos · 04-16-2010, 07:01 PM

Pics of the clutch. Engine is on hold atm. I might actually end up using it pending discussion with tom and what my bro can find for me.

mikealicious · 04-16-2010, 07:27 PM

is the block the whole motor including the head? or just the bottom end?

Wagamos · 04-16-2010, 08:33 PM

No head. Just the bottom end.

Wagamos · 04-17-2010, 01:04 PM

Ok ppls lets get some offers on the clutch. Ill drop it to $150 plus shipping. Seriously i want it gone. Shoot me a crazy offer if you think im too high.

Red01Focus · 04-17-2010, 01:36 PM

how many miles on clutch and flywheel?

Wagamos · 04-17-2010, 01:40 PM

I dont know thats the problem. It came out off the engine with 80k on it. It isn't an oem clutch so it must have been replaced within that time. As you can see the flywheel has very little wear and the clutch looks to have life left to it. Im going to try to get my friend who used to be a transmission mechanic to look at it and estimate miles left. Pics is all i have for now.

solofocus · 04-18-2010, 11:02 PM

how much you want for the block

Wagamos · 04-20-2010, 09:43 AM

Im not sure if im going to sell it quite yet. Ill post it back up when I decide. Im going to go look at another engine today and if that is what I want ill be looking to get rid of the svt block.