06 with SVT Interior

[insaneaudio]

Anyone???

[Red01Focus]

Originally Posted by insaneaudio

This is all thanks to mjmallon

http://picasaweb.google.com/lh/photo...eat=directlink


For the Driver seat:

svt pin 1: driver side-airbag signal: wire to driver seat harness pin 9
svt pin 2: driver side-airbag return: wire to driver seat harness pin 10
svt pin 3: not used
svt pin 4: not used
svt pin 5: seat heaters switched power pass-through: jumper with svt pin 11
svt pin 6: heated seats switched power: wire to driver seat harness pin 5
svt pin 7: seatbelt buckle sensor signal: wire to driver seat harness pin 3
svt pin 8: seatbelt buckle sensor return: wire to driver seat harness pin 4
svt pin 9: powered seat-height power: wire to constant power
svt pin 10: powered seat-height ground: wire to ground
svt pin 11: seat heaters switched power pass-through: jumper with svt pin 5
svt pin 12: seat heaters ground: wire to passenger seat harness pin 8
svt pin 13: seat track position sensor signal: wire to driver seat harness pin 1
svt pin 14: seat track position sensor return: wire to driver seat harness pin 2


For the Passenger seat:

svt pin 1: passenger side-airbag signal: wire to passenger seat harness pin 9
svt pin 2: passenger side-airbag return: wire to passenger seat harness pin 10
svt pin 3: seatbelt pretensioner switched power: wire to passenger
seat harness pin 5
svt pin 4: seatbelt pretensioner signal return: wire to passenger seat
harness pin 6
svt pin 5: heated seats switched power: wire to passenger seat harness pin 1
svt pin 6: seat heaters switched power pass-through: jumper with svt pin 11
svt pin 7: seatbelt buckle sensor signal: wire to passenger seat harness pin 3
svt pin 8: seatbelt buckle sensor return: wire to passenger seat harness pin 4
svt pin 9: not used
svt pin 10: not used
svt pin 11: seat heaters switched power pass-through: jumper with svt pin 6
svt pin 12: heated seats ground: wire to passenger seat harness pin 8
svt pin 13: not used
svt pin 14: not used

ok so im not understanding how you get all of the functions to work on the svt seats if you have the stock square harness since the svt harness is rectangular

[insaneaudio]

what functions are you wanting to hook up? The square plugs in my car only had wires for: Drivers side> seat heat, rail position, seatbelt. I had to add the power and ground for the up/down motor. Passenger side> seat heat, pressure sensor(05 and up cars), seatbelt. My car never came with heated seats but the wires were all there and even had power going to them, I took out the center counsl found the plugs, plugged in the switches and I was up and running.

[Red01Focus]

how do you add the wiring for the up and down of the drivers seat, i want to also test the seat heaters to make sure they work so that i can sell them

[norcalfocus01]

Originally Posted by Red01Focus

how do you add the wiring for the up and down of the drivers seat, i want to also test the seat heaters to make sure they work so that i can sell them

Originally Posted by insaneaudio

My car never came with heated seats but the wires were all there and even had power going to them, I took out the center counsl found the plugs, plugged in the switches and I was up and running

lift up the center console and find the wires for the other functions, then run wire from there to the seat.

[insaneaudio]

for the drivers side heat hook 12V+ to pin 6 with a jumper wire to from pin 5 to pin 11 and hook 12v- to pin 12, and the passenger hook 12v+ to pin 5 with a jumper from pin 6 to pin 11, than 12v- to pin 12. that will put power to the top and bottom heat pads.

[zinsavage123]

nice dude. love the seats

[Red01Focus]

so the wires are there just not hooked up? yeah i need to get a new center console anyways mine is in the way of the side adjusters

[insaneaudio]

Originally Posted by Red01Focus

so the wires are there just not hooked up?

They were in my car, they were kinda tucked in under the airbag module

[Red01Focus]

ok, well i know what the next project will be lol