|
||||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
General Forced Induction The place to chat about turbochargers, superchargers nitrous systems and custom engine fabrications.
|
![]() |
![]() |
|
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||
|
Hmmmmm
|
SPA wastegate with SPA 5250 turbo. Need WG Spring.
ok guys so im getting really close to done with my kit. i need a couple things here and there.
What size spring does the SPA wastegate come with stock? 8? where would i get a different one? i want to run probably about 12 lbs to get ~220 whp also when im done installing my kit can i drive it down untuned to the tuners as long as i try not to go into boost?
__________________
Slow and Low
For Your Visual Pleasure Last edited by drunkyoda; 05-09-2013 at 05:30 PM. |
||||
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 | ||||
|
TURBO ZX3
|
no you need a base tune to even start it up with the new injectors and different things. I had my car towed many a times to shops to get shit welded or whatever and told them do NOT start my car yet
__________________
FF MODERATOR RISE AGAIN EGGYOLK130 WHP 124 WTQ ZETEC CREW #271 RIFF CREW TURBO DYNO COMING SOON |
||||
|
|
|
|
|
#3 | ||||
|
Hmmmmm
|
it probably is a little different with a built motor...
|
||||
|
|
|
|
|
#4 | ||||
|
Fins Up!
|
no its not. just b/c your engine is built it doesnt mean your ecu knows it has different size injectors and maf housing
__________________
Turbo Turtle Garage facebook.com/turboturtlefabrication TurboTurtleFab@gmail.com |
||||
|
|
|
|
|
#5 | ||||
|
TURBO ZX3
|
correct
__________________
FF MODERATOR RISE AGAIN EGGYOLK130 WHP 124 WTQ ZETEC CREW #271 RIFF CREW TURBO DYNO COMING SOON |
||||
|
|
|
|
|
#6 | ||||
|
Hmmmmm
|
hmmm so i guess ill be using a dolly.
Does anyone know anything about the spring??? |
||||
|
|
|
|
|
#7 | ||||
|
Focus Addict
|
Use a boost controller ;) 8 psi is gone be the least boost u will see if u crank up the boost controller the boost is gonna rise
__________________
cossie im, cfm 67mm tb, 3" dp, 3" exhaust and custom turbo kit, holset hx35 turbo on 12psi best 1/4 time: 14.05 @ 102mph 60ft 2.1 on 8.5psi team duratec #94 D23 crew #9 |
||||
|
|
|
|
|
#8 | ||||
|
Focus Fanatic
|
^^^^what he said. Use a boost controller. I had both a manual bc and an electric boost controller. The ebc from Turbosmart worked awsome. You'll be able to crank it up. Atleast double the spring installed. Also I have a new SPA waste gate that came with the 5250 turbo kit. I never used it. Went with the evo and then the Tial. Let me know if you want it. $25 plus the Shipping.
|
||||
|
|
|
|
|
#9 | ||||
|
TURBO ZX3
|
that's a fantastic deal for a wg
__________________
FF MODERATOR RISE AGAIN EGGYOLK130 WHP 124 WTQ ZETEC CREW #271 RIFF CREW TURBO DYNO COMING SOON |
||||
|
|
|
|
| Bookmarks & Social Networks |
| Thread Tools | |
| Display Modes | |
|
|
|
||||