For Sale: Partial Turbo Kit (Zetec)

[UMDivX]

* Tentatively Sold!!! *


Item Description - As the Title says, Ive got a partial turbo kit for sale. This is a one off, pieced together system. Not a true home made turbo kit but not a full shop made kit either.

So here's what I've got:

- IHI Turbo off of a 2002 subaru, still good, no shaft play at all, seals also good
- Boost Factory Log Mani
- Boost Factory Downpipe (boost factory is a local VW shop that made the log mani and downpipe, I provided the flanges for the setup)
- Oil Feed and Return lines
- Waste Gate
- BOV
- Manual Boost Controller
- 42# injectors
- PCV oil catch can
- Stock focus MAF and 75mm Crown Vic MAF with separated AIT temp sensor
- Misc clamps, hoses, ect...
- First Gen DSM Side mount Intercooler
- Other misc parts for the setup

Basically all that is need is the piping and if wanted a front mount intercooler.

Asking/Offering Price - $750 or best offer

Email Address - umdivx@gmail.com

Location - Minneapolis, MN

Pics - http://homepage.duluthmn.com/~umdivx/Turbo%20Stuff/

thanks for looking,
- Josh

EDIT: I've also got a 3 program flip chip (2 programs, 1 stock) Diablo sport chip. Depending on the offer I can also throw that into the mix.

[Sponsor]

[jamfrank]

pics to jamfrank69@yahoo.com

[UMDivX]

link to pics are in the first post.

- Josh

[Dubbs005]

did this come off of a focus?

[UMDivX]

The system was NEVER used (on my car on any focus, parts are used though, cept the mani and DP which are still new). I bought the turbo used that came off of a Subaru WRX Wagon with 20k miles, then I had the flanges made, and brought the setup to a local shop that made the manifold and down pipe.

I was slowly piecing the setup together while i was saving for tuning. Well I've decided not to turbo my focus as I am looking for a new car.

Most of the pieces are used, that was bought from various focus guys. This is close to a home made kit (other than mani and downpipe), so all thats really needed is charge piping and intercooler, but you could also do a non-intercoooled setup as well.

- Josh

[700whpfocus]

Pictures Please.

[Peregrine]

Originally Posted by UMDivX

link to pics are in the first post.

- Josh

Check up top 700whp. Free bump!

[UMDivX]

does no one even read the post????

Pics - http://homepage.duluthmn.com/~umdivx/Turbo%20Stuff/

heres also more pics of the turbo: http://homepage.duluthmn.com/~umdivx...024%20x%20768/

thanks for the bump Infrared...

- Josh

[jamfrank]

doesnt came with a MAF?

[UMDivX]

yes it comes with a stock focus MAF and housing, also comes with a 75mm Crown Vic MAF with separated AIT temp sensor.

With low boost setups, the stock MAF will work just fine as you won't reach the voltage limit on the MAF. and with the crown vic MAF and separated AIT temp sensor you've got plenty of room to play with and then you get the better control with the separated AIT temp sensor.

- Josh