Focus Fanatics Forum banner

Heater fan blower problem

1K views 2 replies 3 participants last post by  niggly51 
#1 ·
From this post you can tell I'm new to this and have probably incorrectly posted this in the wrong place.

I have a 52 plate focus, and my inside blowers do not work on speeds 1-3, but 4 is fine. After looking online I discovered the fault was with the Fan Blower Resistor. I have now replaced this 3 times in as many months and tried something new each time and still it keeps breaking, so I was hoping somebody would be able to give me advice as to where the problem may lie.

Problems I have considered:
Getting damp - Therefore last time I moved the resistor to sit inside the cockpit of the car so no outside moisture can get to it.

I am starting to think the problem must be electrical, but have no idea of how to check, as the fuses all seem fine.

Many thanks

Skibu
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top