Focus Fanatics Forum banner

>>>>>>newbie here<<<<<<

4K views 22 replies 9 participants last post by  Zona Kona 
#1 · (Edited)
[wave]

Hello all. im new here I am 22 years old. I was referred by Mr Trav-E2.0, I recently picked up a 2004 focus with some front and rear damage. No pics just yet but Travis has seen my work in progress thus far lol. I shall get current pics hopefully tomorrow, also located in the sunny state of AZ....
 
#21 ·
yes how can you tell?, found it cheaper than to buy 5 pints of different colors, reducer and thinner lol
came out damn good too (for rattle cans) lol.
Question is can i use clear on this or will it wrinkle? I will shoot the clear with a spray gun..
worked too hard on this & I don't want to ruin it... lol
You can, but you have to be very carefull about this. Hopefully you used all of one brand and type of paint. If, call them and ask what air spray application clear coats will not brak down your base coat, if there are any. Also, ask them about the re-coat window, as the timing of the clear coat application will affect its reaction with the base coat.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top