Focus Fanatics Forum banner

AEM wideband and sct data log

2K views 15 replies 4 participants last post by  94guy 
#1 ·
the problem i have is i can only log a/f as the only PID on my sct with a laptop. i normally run about 12 pids with the 12 the a/f only records for like 1 second when the log starts. if i only load just the a/f as only pids it reads real time data. why don't it read with all the pids?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top