|
||||||||
|
Auto Cross, Drag Racing, Car Show, Awards & Prizes - Register Now! |
||||||||
|
|||||||
General Technical Chat This section is for technical discussions relating to general maintenance, electrical issues, engine trouble, and recalls.
|
![]() |
![]() |
|
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||
|
Focus Enthusiast
|
Small leak, clutch pedal.
Hello all. Hopefully the right forum for this.
The vehicle I'm experiencing this issue with is an 04 zx3 with the 2.0L There seems to be a fluid dripping from the clutch pedal. It's coming from a cylinder down under the dash attached to the clutch pedal arm What is this part and how easily replaced is it? Should I bother fixing myself or just take it to Dobbs? |
||||
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 | ||||
|
FF's Night Security
|
This is the part you need, also shop around for the best price. It's a common problem on all standard foci, you can replace it your self and save some quite a bit of money. HERE is the how to for it.
__________________
I started out with nothing and I still have most of it left Hatch Nation #15 (Ole' Yeller') & #150 (The SVT) Moderator for Technical Chat Zetec Performance Chat Southern Fanatics Chat |
||||
|
|
|
|
|
#4 | ||||
|
FF's Night Security
|
We do have a Rep system and it's right below our post count number, you just click and give Rep. HERE is the Rep system explained better. If you have any other questions don't be afraid to ask
__________________
I started out with nothing and I still have most of it left Hatch Nation #15 (Ole' Yeller') & #150 (The SVT) Moderator for Technical Chat Zetec Performance Chat Southern Fanatics Chat |
||||
|
|
|
|
|
#7 | ||||
|
Focus Enthusiast
|
Ok so I put in the new master clutch cylinder but now I need to adjust my clutch pedal so it doesn't release as soon as I take my foot off... Like I push the pedal all the way to the floor, put it in gear, almost as soon as i take pressure off the pedal it engages.
I know how to do this with a cable clutch, but I'm clueless with a hydraulic. |
||||
|
|
|
|
|
#8 | ||||
|
FF's Night Security
|
If you bled it and don't have any air then that's probably how it should be. Mine engages practically right off the floor also, where as my SVT wouldn't engage till almost at the end of the pedal travel. Before I replaced the clutch in my yellow focus it engaged right at the end of it's travel just like the SVT.
__________________
I started out with nothing and I still have most of it left Hatch Nation #15 (Ole' Yeller') & #150 (The SVT) Moderator for Technical Chat Zetec Performance Chat Southern Fanatics Chat |
||||
|
|
|
|
| Bookmarks & Social Networks |
| Thread Tools | |
| Display Modes | |
|
|
|
||||