Focus Fanatics Forum banner
Status
Not open for further replies.

Speaker Wire Colors

137K views 0 replies 1 participant last post by  hotfocus 
#1 ·
Courtesy of LiquidGrayZX5

Pin --- Color --- Stripe --- Function

Harness 1

1 --- White --- Black --- Left front +
2 --- Gray --- Black --- Left front -
3 --- White --- Purple --- Left rear +
4 --- Gray --- White --- Left rear -
5 --- White --- Red --- Right front +
6 --- Gray --- Red --- Right front -
7 --- White --- (none) --- Right rear +
8 --- Gray --- (none) --- Right rear -

Harness 2

1 --- (not used)
2 --- Black --- Green --- Radio Ground
3 --- (not used)
4 --- Orange (thin) --- Black --- Radio Illumination
5 --- Green --- Yellow --- Radio switch
6 --- Black --- Yellow --- Radio Ground
7 --- Orange (thick) --- Black --- Radio 12V

Harness 3

1 --- White --- Green --- Speed sensor
2 --- (not used)
3 --- (not used)
4 --- (not used)
5 --- (not used)
6 --- (not used)

The speed sensor wire is for the Speed controlled volume feature of these radios. I have no earthly idea why there are two different ground wires (black/green, black/yellow), but that is the way it is.
 
See less See more
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top