air box - Focus Fanatics
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Focus Fanatics > Ford Focus Tech Discussions > General Technical Chat

General Technical Chat This section is for technical discussions relating to general maintenance, electrical issues, engine trouble, and recalls.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

Reply
 
Thread Tools Display Modes
Old 04-03-2014, 03:54 AM   #1
pmitchell
Focus Rookie
 
Join Date: Apr 2014
Fan#: 153330
Location: Lawrenceville, GA
What I Drive: 2004 white ztw

Posts: 1
FF Reputation: 1 pmitchell Good Standing Member
Buy-Sell-Trade Rating: (0)
air box

Hello all!
I'm new here and have a problem with my engine. I own a 2004 ford focus ztw station wagon. I pulled out the air box thinking I could replace the filter... Ooops. Put it back on and now my car idles really high. So much that when I apply the brakes it revs before I come to a stop and keeps me moving forward. I noticed that there is a hose connector at the bottom of the box, but don't see that a hose goes to it. Is the problem that I missed connecting a hose there? Or did I undo something else. It ran fine until I removed and replaced the box. Any help would be greatly appreciated. Thanks


pmitchell is offline  
    Reply With Quote
Sponsored Links
Advertisement
 
Old 04-03-2014, 06:58 AM   #2
SlowestSVT
Focus Enthusiast
 
SlowestSVT's Avatar
 
Join Date: Jan 2012
Fan#: 94541
Location: Hollywood, MD
What I Drive: 2004 Red SVT

Posts: 103
FF Reputation: 1 SlowestSVT Good Standing Member
Buy-Sell-Trade Rating: (8)
1. There should be a hose from right side of the valve cover (just above the spark plug wires) that runs into the bottom of the airbox.

-this is not causing your idle problem.

2. Double check you plugged the MAF back in if you unplugged it to remove the filter.
3. Disconnect your negative battery terminal for 5-10 minutes this should reset your ECU and let it re-learn the idle settings.

-That should fix your problems
__________________
Where we're going we don't need roads.
SlowestSVT is offline  
    Reply With Quote
Old 04-03-2014, 10:06 AM   #3
sailor
"Elder"
 
sailor's Avatar
 
Join Date: Jun 2008
Fan#: 57268
Location: Williamsville, NY
What I Drive: 2004 Pitch Black ZTS 2.3 5spd.

Posts: 11,726
FF Reputation: 60 sailor Excellent Standing Member
Buy-Sell-Trade Rating: (0)
Moved to General Tech. Chat, best place for mechanical problem answers.

Welcome to FF!

I'll add to double check everything is connected correctly. You may have pulled another tube loose that's connected to the resonator box you removed.
__________________
"Rubber Side Down"

S.R. #275
sailor is online now  
    Reply With Quote
Old 04-03-2014, 12:06 PM   #4
Marde
Focus Addict
 
Marde's Avatar
 
Join Date: Jun 2013
Fan#: 115991
Location: Mesa, AZ
What I Drive: 2004 ZTW PZEV 2.3 ATX

Posts: 707
FF Reputation: 7 Marde Good Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by pmitchell View Post

... I noticed that there is a hose connector at the bottom of the box, but don't see that a hose goes to it...
You are not the first person to be fooled by that hose nipple sticking out from the resonator. Ford did that to remind us that they too have a sense of humor. That nipple does not have a hole inside it, so there is no air escaping.

You need to remove the resonator again, here is why... The resonator sits on top of the MAF tube. In-between the resonator and the MAF tube is a large rubber seal. When the resonator is re-installed, it is awkward, and the rubber seal can get pinched & damaged and create an air gap.

When I first got my Focus, I found a tiny-tiny piece of rubber stuck inside my IAC valve. This debris was causing idle problems like you have reported (and a few other symptoms too). Soon after, I found the resonator rubber seal was mutilated. Bought a new rubber seal at Ford.

__________________
You've got to ask yourself one question: Do you feel lucky? -and could you really drive a Focus ATX Wagon?

Last edited by Marde; 04-03-2014 at 12:10 PM. Reason: added pic
Marde is online now  
    Reply With Quote
Old 04-04-2014, 07:54 PM   #5
Lajtung
Focus Enthusiast
 
Lajtung's Avatar
 
Join Date: Apr 2014
Fan#: 153666
Location: Zagreb, Croatia
What I Drive: 2000 Silver Zetec-S

Posts: 89
FF Reputation: 1 Lajtung Good Standing Member
Buy-Sell-Trade Rating: (0)
How high it revs? I'd go with SlowestST suggestion. Check MAF. If it does not help, then check map sensor, temperature sensor, iscv valve... if the issue is not related, then it might be throttle position sensor, even lambda can do that. Resonator alone is not causing this, I have removed the resonator and there is only a hole now. There is absolutely no difference what so ever except the sound is slightly different.
Lajtung is offline  
    Reply With Quote
Reply

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:02 AM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information : Site Map

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.