Focus Fanatics Forum banner

Wheel Stripes thread!!

4K views 7 replies 5 participants last post by  TerryB 
#1 ·
well I have a 2000 white ZX3 and I am planing in painting the wheels black and put in on some red wheel stripes

my wheels are 15" oem



these are the stripes from shine graffix that I am getting:
http://www.shine-graffix.com/wheel-stripes/65/ford-wheel-stripes-detail

Any opinions please post it.

so if you have any pic of wheel stripes post it and put details of size that will help everybody here! [thumb]

Thanks
 
See less See more
1
#2 ·
I had always just painted the whole thing and do a red stripe.

This is once when I had kept the stripe when redoing the black part, so it needed touched up.

There's one of them on the car, they were a little dirty though.
My opinion would be to just paint them black and leave a silver lip/stripe. If you paint over bare aluminum, make sure you have conversion coating or you scuff them and clean them directly(seconds) before primer. that small painting tip helped me tremendously the last time I painted my rims and they held up perfectly to all the rocks and everything I could throw at them.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top