Buffer splatters polish - Ford Focus Forum, Ford Focus ST Forum
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Ford Focus Forum, Ford Focus ST Forum > Ford Focus Tech Discussions > Auto Washing, Detailing & Paint Protection

Auto Washing, Detailing & Paint Protection Discuss wax, polish, chamois, microfiber towels, simple cloth towel, scratch repair and paint protection. Use this Forum to discuss your cleaning tricks and techniques.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

Reply
 
Thread Tools Display Modes
Old 07-17-2014, 08:59 PM   #1
Toasty
Focus Enthusiast
 
Toasty's Avatar
 
Join Date: Jan 2014
Fan#: 135042
Location: Glen Burnie, MD
What I Drive: 2012 Candy Blue MK3

Posts: 109
Points 266, Level 5
Points: 266, Level: 5 Points: 266, Level: 5 Points: 266, Level: 5
Level Up 32% Completed
Level up: 32% Level up: 32% Level up: 32%
Forum Activity 0%
Activity: 0% Activity: 0% Activity: 0%
FF Reputation: 1 Toasty Good Standing Member
Buy-Sell-Trade Rating: (0)
Buffer splatters polish

Hey all,

So I have a buffer that I have used a couple times to try and polish my car. I'm a real noob when it comes to polishing and I've never been able to fully polish my car without problems or completely killing my arm because I don't know what I'm doing. So I thought since I have a buffer why not use it? Only problem is it seems the attachments I have seem to splatter my polish all over the car and on my windshield and mirrors ( it was such a pain getting all that off ) anyways is there a way to prevent this or was I just using too much polish? I only used a dab or so on the buffer and then I tried putting it directly on the car then polishing.

Any tips or advice is appreciated thanks.


Toasty is offline  
    Reply With Quote
Sponsored Links
Advertisement
 
Old 07-17-2014, 09:04 PM   #2
papaacer
Sonic's MK3 Crew #25
 
papaacer's Avatar
 
Join Date: Mar 2013
Fan#: 111083
Location: Willows, CA
What I Drive: 2012 Race Red SE

Posts: 5,642
Points 5,603, Level 48
Points: 5,603, Level: 48 Points: 5,603, Level: 48 Points: 5,603, Level: 48
Level Up 27% Completed
Level up: 27% Level up: 27% Level up: 27%
Forum Activity 58%
Activity: 58% Activity: 58% Activity: 58%
FF Reputation: 10 papaacer Great Standing Member
Buy-Sell-Trade Rating: (3)
Quote:
Originally Posted by Toasty View Post
Hey all,

Any tips or advice is appreciated thanks.
You need to spread it around with your finger first on the buffing pad. That is the primer. Then, you put more on there then tap it onto the area that you are going to buff. This guy knows all with detail. Study his videos. It helped me ALOT. https://www.youtube.com/watch?v=zCW8Y_aW_GA
__________________
2.25 Axle-Back; Steeda Intake;Styluz M575 Wheels; 155.27 WHP; Tom's Tune; First Selectshift Conversion IG: @papaacer
Quote:
Originally Posted by Twenty View Post
That's because if a sedan was used there would be too much awesomeness and the internet would explode.
papaacer is offline  
    Reply With Quote
Old 07-17-2014, 09:17 PM   #3
felixthecat
w/ my magic bag
 
felixthecat's Avatar
 
Join Date: Nov 2010
Fan#: 80663
Location: Renton, WA
What I Drive: '05 Silver Sport Technologies

Posts: 9,445
Points 10,452, Level 68
Points: 10,452, Level: 68 Points: 10,452, Level: 68 Points: 10,452, Level: 68
Level Up 1% Completed
Level up: 1% Level up: 1% Level up: 1%
Forum Activity 99%
Activity: 99% Activity: 99% Activity: 99%
FF Reputation: 59 felixthecat Excellent Standing Member
Buy-Sell-Trade Rating: (0)
Put 3 to 4 pea size drops on the pad & then put the machine on the panel your starting w/ & then turn it on. Do a 2' x 2' section overlaping a couple of times or so & then turn it off 1st & then lift the machine off the surface. take a clean mircofiber towel & wipe off & look. If it needs more correction, do some more & then if more go w/ a heavier compound w/ a clean pad. Always turn the machine on & off w/ the machine against the surface. Yea, you turn the machine off w/ it on the surface & then get in a hurry or forget that the wheel is still turning even thou the machine is off & its all over you & the car. So off & on w/ the machine on the surface w/ the pad stopped.
__________________
Introduce Mr. Torsen to the mixBigger brakes then you- D23 crew- D-Tech- Sedan Revolution= #131
felixthecat is online now  
    Reply With Quote
Old 07-17-2014, 10:37 PM   #4
Toasty
Focus Enthusiast
 
Toasty's Avatar
 
Join Date: Jan 2014
Fan#: 135042
Location: Glen Burnie, MD
What I Drive: 2012 Candy Blue MK3

Posts: 109
Points 266, Level 5
Points: 266, Level: 5 Points: 266, Level: 5 Points: 266, Level: 5
Level Up 32% Completed
Level up: 32% Level up: 32% Level up: 32%
Forum Activity 0%
Activity: 0% Activity: 0% Activity: 0%
FF Reputation: 1 Toasty Good Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by felixthecat View Post
Put 3 to 4 pea size drops on the pad & then put the machine on the panel your starting w/ & then turn it on. Do a 2' x 2' section overlaping a couple of times or so & then turn it off 1st & then lift the machine off the surface. take a clean mircofiber towel & wipe off & look. If it needs more correction, do some more & then if more go w/ a heavier compound w/ a clean pad. Always turn the machine on & off w/ the machine against the surface. Yea, you turn the machine off w/ it on the surface & then get in a hurry or forget that the wheel is still turning even thou the machine is off & its all over you & the car. So off & on w/ the machine on the surface w/ the pad stopped.
That actually was probably my problem the whole time, never even occurred to me to do that. Do you guys recommend any buffing pads in particular, or know where to get some good ones? I have a bunch of polish's, just no really good pads.

And I'm definitely gonna take a look at that link papaacer.

thank you both for the info
Toasty is offline  
    Reply With Quote
Old 07-17-2014, 11:02 PM   #5
papaacer
Sonic's MK3 Crew #25
 
papaacer's Avatar
 
Join Date: Mar 2013
Fan#: 111083
Location: Willows, CA
What I Drive: 2012 Race Red SE

Posts: 5,642
Points 5,603, Level 48
Points: 5,603, Level: 48 Points: 5,603, Level: 48 Points: 5,603, Level: 48
Level Up 27% Completed
Level up: 27% Level up: 27% Level up: 27%
Forum Activity 58%
Activity: 58% Activity: 58% Activity: 58%
FF Reputation: 10 papaacer Great Standing Member
Buy-Sell-Trade Rating: (3)
Check out chemical guys, they make some really good pads.
__________________
2.25 Axle-Back; Steeda Intake;Styluz M575 Wheels; 155.27 WHP; Tom's Tune; First Selectshift Conversion IG: @papaacer
Quote:
Originally Posted by Twenty View Post
That's because if a sedan was used there would be too much awesomeness and the internet would explode.
papaacer is offline  
    Reply With Quote
Old 07-18-2014, 11:26 AM   #6
PratoN
Focus Fanatic
 
PratoN's Avatar
 
Join Date: Jul 2011
Fan#: 88058
Location: Milwaukee, WI
What I Drive: 2012 Kona Blue Ti Hatchback, DCT

Posts: 3,887
Points 2,829, Level 32
Points: 2,829, Level: 32 Points: 2,829, Level: 32 Points: 2,829, Level: 32
Level Up 53% Completed
Level up: 53% Level up: 53% Level up: 53%
Forum Activity 11%
Activity: 11% Activity: 11% Activity: 11%
FF Reputation: 13 PratoN Great Standing Member
Buy-Sell-Trade Rating: (0)
The first time I used my Flex I didn't know it had a trigger lock and I took it off the surface and it kept running on the highest setting and omg it was everywhere.

Guess I should have read the manual?

But yes, prime the pad so that you're not forced to use more product than you need, then just a few pea sized spots of it (depends on the product too) and don't remove the pad from the car until it has stopped or is almost stopped.
__________________
2012 FF Ti HB Kona Blue, Built 5/24/2011, 401A + Ti Handling Package, Parking Technology Package, Winter Package, Moonroof, and MFT w/NAV at v3.6 96k miles and counting...
PratoN is offline  
    Reply With Quote
Old 08-04-2014, 10:34 PM   #7
Garyshome
Focus Enthusiast
 
Join Date: Jul 2014
Fan#: 176825
Location: pinehurst, NC
What I Drive: 2000 white focus

Posts: 61
Points 40, Level 1
Points: 40, Level: 1 Points: 40, Level: 1 Points: 40, Level: 1
Level Up 80% Completed
Level up: 80% Level up: 80% Level up: 80%
Forum Activity 0%
Activity: 0% Activity: 0% Activity: 0%
FF Reputation: 1 Garyshome Good Standing Member
Buy-Sell-Trade Rating: (0)
Polishing compound on the car and water on the pad.
Garyshome is offline  
    Reply With Quote
Old 08-05-2014, 11:51 AM   #8
felixthecat
w/ my magic bag
 
felixthecat's Avatar
 
Join Date: Nov 2010
Fan#: 80663
Location: Renton, WA
What I Drive: '05 Silver Sport Technologies

Posts: 9,445
Points 10,452, Level 68
Points: 10,452, Level: 68 Points: 10,452, Level: 68 Points: 10,452, Level: 68
Level Up 1% Completed
Level up: 1% Level up: 1% Level up: 1%
Forum Activity 99%
Activity: 99% Activity: 99% Activity: 99%
FF Reputation: 59 felixthecat Excellent Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by papaacer View Post
Check out chemical guys, they make some really good pads.
Which are buff n shines. Don't forget about Lake country pads= lot of styles & choices. As long as you use clean/new pads & a good technique= 2'x2' area, slow overlapping passes.
__________________
Introduce Mr. Torsen to the mixBigger brakes then you- D23 crew- D-Tech- Sedan Revolution= #131
felixthecat is online now  
    Reply With Quote
Reply

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:37 AM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.