Focus Fanatics Forum banner

martyn

2K views 4 replies 5 participants last post by  1turbofocus 
#1 ·
can somebody please tell me how to connect a 2000 ford focus standard ecu to run the standard focus instrument cluster, while using a m-tech v3 magasquirt ecu to run a 2.0ltr duratec on gsxr1000 throttlebodies, vehicle to be used for hillclimbing, but roed legal
 
#5 ·
Let me see if I get this straight

This is in a 2000 Focus ?

Duratec engine ?

ITB Bike Carbs ?

The biggest this is ALL Focus ECU have PATS and the 2000 Ford Focus ECU the PATS cannot be turned off in the SCT tuning software , BUT a few of the Duratec Focus codes the PATS can be turned off but I am not sure if the dash in the 2000 can be run off the later ECU

Now if your running the 2000 Focus with the 2000 ECU and your keeping the stock key and switch then I dont see any issues with it working

Sense your going to standalone whey not just make your own dash and gauges ?

Tom
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top