Focus Fanatics Forum banner

Best place to tap into radiator / coolant lines.

2K views 7 replies 3 participants last post by  ZXthrizzle05 
#1 · (Edited)
Any recommendations/suggestions on where the best place to tap into the coolant system is.... For both feed and return lines.

When considering "best location" I mean where will provide the coolest water and the best circulation/flow.

Thanks in advance.
 
#3 ·
Can i tap the same line (bottom radiator hose) for the feed and return lines?

Or should i feed from the bottom radiator hose and return it somewhere else in the system?

Forgive my ignorance i just have no idea about the focus cooling system...
 
#5 ·
I have pics dictating how I did mine. I went to Home Depot and got three things in the plumbing section. 5/8 npt fitting then 5/8 reducer to the coolant size line to the turbo. With a fastener in between both. I used the lower radiator hose like tom said. Just cut it in half. Make sure fittings are super tight and use worm clamps as well. Don't want to leak a lil coolant
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top