Focus Fanatics Forum banner
Status
Not open for further replies.

**Nominations for May ROTM-CUSTOM PLATES**

9K views 75 replies 49 participants last post by  Chick 
#1 ·
This month we are taking nominations for:

CUSTOMIZED PLATES

If you have customized plates (euro plates, unless you are in a country that uses them, do not count) then you can be nominated for ROTM. Please post up a picture of your custom plate along with the car. The car still has to be modified of course[:)].

Like always you can nominate yourself but make sure you post a picture up of your car with your nomination.


Please state if you are nominating a member with 'I am nominating ______' and please don't post in here multiple times the member you have already nominated. It makes it hard to try to keep track on how many nominations that person gets.

Remember 50 posts required!

PAST WINNERS LIST
ROTM FAQ'S & RULES

!Please be aware that you MUST HAVE PICTURES UPLOADED ONTO OUR ONLINE GALLERY! If you don't, you will be disqualified from the contest!

These people cannot be nominated again until their 6 month time limit has expired. They have already ran for ROTM twice:

-egbertNR
-Rudel
-auto
-loudfocus01
-jrgtrain



NOMINATIONS END APRIL 27th!
 
See less See more
#8 ·
I nominate myself, 02SilverSVT







And a shot of mine and my dad's custom plates



My plate is "E-200" and it has some history to it. My great-grandpa got the plate in New York in the 1920s, and he got it because he knew some high-up people. My grandpa took over the plate at some point in time and had it up until last year. For whatever reason he couldn't renew it, so to keep the tradition going in a sense I applied for it as a vanity/customized plate here in Florida. I didn't tell him about it because I wanted to surprise him.....you should have seen his face when I went to visit him and he noticed it [:D]



All the ones my grandpa still has, they should become mine someday...
 
#51 ·
My plate is "E-200" and it has some history to it. My great-grandpa got the plate in New York in the 1920s, and he got it because he knew some high-up people. My grandpa took over the plate at some point in time and had it up until last year. For whatever reason he couldn't renew it, so to keep the tradition going in a sense I applied for it as a vanity/customized plate here in Florida. I didn't tell him about it because I wanted to surprise him.....you should have seen his face when I went to visit him and he noticed it [:D]

That's awesome!
 
#18 ·
I nominate homeboyjames' ST
 
#25 ·
I nominate myself

First off this is an old pic of my ass end but the 8gh911 stands for

8 - infinity symbol
G - God
H - Help
9/11

so pretty much, forever God help 9/11

i have alot of other things i want to say but i will do so when voting starts ill be making my own thread
















 
#29 ·
i nominate myself!!!

SPD DMN stand for SPEED DEMON!!








Current Mods
PERFORMANCE- 250whp/245wtq@ 11psi when I had a catalytic converter

● FOCUSSPORT STAGE 2 TURBO KIT
● Garrett GT28R Turbocharger
● Front Mount Intercooler
● 2.5" Stainless Steel Downpipe
● 42lb. Bosch Fuel Injectors
● Turbo Water Line Kit
● Stainless Steel Braided Oil Drain
● NGR Type S BOV - Recirculated (check out the video)
● Custom MAF housing
● ITG Maxogen Air Filter
● FocusSport/SCT XCalibrator 2
● Torsen T2 ATB Differential
● Exedy Hyper Single Stage 3 Clutch/Flywheel Kit
● Turbosmart Eboost 2 Electronic Boost Controller
● AEM UEGO Wideband
● Medieval LLC Lightweight Water Pump Pulley
● Trubendz 2.5" Stainless Steel Exhaust w/Magnaflow Muffler and Race Pipe
● Steeda Short Throw Shifter
● Denso Iridium Spark Plugs
● All powdercoated Plumbing

HANDLING- Approximately .97g
● FRPP KW 1.6" Lowering Springs
● 21mm SVT/ST Front Sway Bar
● H&R 24mm Rear Sway Bar
● FocusCentral Front Stress Bar
● Nitto Neogen 225/45/17 front tires
● Falken FK452 215/45/17 rear tires
● Focussport Lower Control Arm Brace
● CFM Rear (Dogbone) Motor Mount

APPEARANCE
● Enkei J10 wheels
● 44/26% Tinted Windows
● FocusSport Front Lip
● Roush Hood Scoop
● Drilled and Slotted Front and Rear Brake Rotors
● Red Brake Calipers
● Black Bumper Lenses
● 6000k HID Bixenon Headlights
● Eurodezigns Foglights
● Sylvania Silverstar Parking Lights
● LED Brake Lights and Back-up Lights
● Evo VIII/IX Rear Wing (custom modified by me to fit)
 
#34 ·
THANX BUDDY!!
Is that just your euro plate or does your state plate say that as well?
i dont think they would put bitch on a liscense plate. haha! but if it is ur state plate as well....awesome!! i didnt think id be able to put ho on my plates but i got it!
 
#36 ·
ok well i guess i stir the water a lil more and nominate my self!

roush plate. this is my only pic of it. this was when i was installing the euro rear.




and the good pics now.
















details
o3 cd silver eap svt
euro rear end
stock zx3 front
shaved drivers side key hole in the door (rear door handle)
blacked machs
2.5inch borla catback with a magniflow muffler
screamin deamon coil pack and liver wires
sort ram intake
semi wire tucked
optima red top
motegi spline drive red capped lug nuts
side skirt delete
blacked out side markers
blacked out tails
euro upper grill
h&r race springs
agx adjustables
mogg front endlinks
poly rear endlings
poly lower mount
4 point harness for drivers side
"THIS SIDE UP" decal on the roof
rusted hood, and raised up
rear wiper delete, with a sedan washer resivor and wiper switch
debadged
garden edgine lip

soon to come
98 euro front end with fenders, and hella turn signals
black eaps
more drop!
 
#38 ·


what pastic is that?
what do i have to do to do this mod?
it should be apply to any cars right?
PM me for this answer, i want to know more. thanks!

now you know, when to change coolant!
 
#39 ·
oops, forgot to add my mod list..

Performance:
focus central intake
focus central 65mm t/b
ford racing shorty header
r/t high flo cat
focussport flex
2.5" borla exhaust
ford racing stage 2 cams
adjustable cam gears (set to 0 for right now)
high output alternator

Suspension:
eibach sportlines
kyb agx shocks and struts
saleen racecraft front and rear sway bars with poly bushings and endlinks.
nitto neo gen tires 205/40/17
centric slotted rotors
hawk hps pads

Appearance:
enkei evo 5 in bronze wheels
collections replica front bumper
F2 side skirts
F2 RS rear bumper
aftermarket spoiler
euro upper grill
ebay mach-a-likes with a hid conversion
tint (thats faded) lol

Interior:
panasonic headunit
mtx class d amp
2 mtx 12" subs
tweeters in front and rear doors
black "focus" floor mats
"focus" door sill covers

miscellaneous:
painted aluminum contour valve cover
massive valve cover appearance kit
various parts painted in the engine bay.
painted interior parts black

upcoming mods:
oem cf hood
tune
euro rear bumper lights and tail lights
and whatever i may want when the time presents itself. lol.

im sure i forgot some stuff but u get the idea. lol!!

and a couple more pics...






and my plates once more..
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top