Yet Another Custom Radar Detector Mount! - Focus Fanatics
Focus Fanatics Ford Focus Forums
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace



Go Back   Focus Fanatics > Model Specific Discussions > MK1 Focus > MK1 Interior Mods & Upgrades

MK1 Interior Mods & Upgrades The place to chat about performance gauges, shifter knobs, custom interior paint, car seats or any interior upgrades for the 2000-2007 Focus.

Search This Forum | Image Search | Advanced Search    
FocusFest Ford Focus Tire & Wheels FocusFanatics Merchandise

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-06-2005, 07:45 PM   #1
FocAL
Focus Jr. Enthusiast
 
FocAL's Avatar
 
Join Date: Apr 2005
Fan#: 22053
Location: Denver, CO
What I Drive: 2005 ZX5 SES - White

Posts: 35
FF Reputation: 1 FocAL Good Standing Member
Buy-Sell-Trade Rating: (1)
Yet Another Custom Radar Detector Mount!

Have a radar detector? Wish you could mount it above the mirror with the suction cup mount, but couldn't because of those darn "shade-dots"?

Here's my solution! It cost me about $5 in parts. First off, here's a pic of my Passport on the mount above the mirror:



Here's a picture of the mount by itself:


OK - This is easy to construct - here's how:

1) Buy a strip of aluminum, 1.5" wide by a 12" long, 1/8" thick. You'll also need 3M's double-sided automotive adhesive (the generics always seem to peel easily under heat), self-tapping sheet metal screws (#10) and some finishing washers (for aesthetics). I'm assuming you have your detectors suction cup bracket.

2) Measure about 2.5" - 2.75" of the aluminum and use a hacksaw to cut off the small piece. Use a file to clean up the edges and corners for burrs and such.

3) Remove the suction cups and place that part of the mount on the aluminum. Drill pilot holes where the screws will go, making sure the screw head will overlap a good part of the detector's bracket (the suction cup holes are usually bigger than the screw head.)

4) Screw the bracket onto the aluminum, making sure the finishing washer is between, and centered. DON'T overtighten - it's easy to do, and unnecessary.

5) Using a Dremel or similar tool, grind off the protruding part of the screw on the backside, and make it smooth.

6) Apply multiple strips of the 3M tape to the side you just grinded/smoothed and trim the excess 3M off of the edges. You're almost done!

7) Clean the area of the "dots" above the mirror with rubbing alcohol and "test fit" the placement of your new mount.

8) Peel the backing off the 3M tape and firmly press your new mount onto the windshield. Here's another good part about this mount: if you "accidentally" set the mount slightly crooked, you can loosen the screws and recenter the radar!

9) Enjoy! You'll still need to hardwire your detector, but I'll leave that up to you.

- Al


FocAL is offline  
    Reply With Quote
 

Bookmarks & Social Networks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:44 AM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information : Site Map

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX. You can find all Ford Focus related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.