Focus Fanatics Forum banner

Quick Question - 2010 SES rear spindle bolts 12 x 1.5 or 10 x 1.5

534 views 0 replies 1 participant last post by  Bugwhacker 
#1 ·
I bought an SVT braking setup for my rears and from what I have read the old spindle used 10 x 1.5 - which is what the parts I bought have and the newer cars use 12 x 1.5 - which is what my car is .

Yes I could take a bolt out and check but if someone knew for sure I would go ahead and machine my holes out and tap them after work.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top