Originally Posted by I Bleed Ford Blue
I had a kenwood dnx9990 in my 11 fusion which is the same as the 6990 just with a bigger screen. The unit is light years better than the earlier models. The processor is faster so switching screens is a lot faster and smoother. If you have an ipod that you listen too get the add on ipod cable for the kenwood HU's its about 30 bucks. You won't regret it, you can scroll thru and find music faster on the touchscreen than you can on the clickwheel on the ipod. If you have sync in the truck and would like to keep it look into the idatalink maestro unit, it is by far the best solution available to keep sync with an aftermarket HU, and its cheaper than the other setup out there. Also the maestro is designed to work with the 2012 model kenwoods (the 6990 is a 2012 model) thru a special serial cable that plugs right into the back of the kenwood.
The 6990 and 9990 will fit in the MK3 with the metra dash kit, you just have to use the metra harnesses, the maestro does work with the MK3's yet.
Well, Kenwood may very well sell me two of these, one for the 06 F350, one for the 13 FoFo SE Hatch... although I may do the truck and be sure I like it before upgrading the Hatch. The truck has no Sync, but it does have steering wheel controls.
SR #265 | "Quia currus certatus, inferius"
13 Focus Ti Sedan w/Handling Pkg, MFT Sony 10 NAV, Leather
13 Focus SE HB Sterling Grey, 201A, Leather
06 F350 6.0L DRW King Ranch, Sunroof, Rhino Bed Liner, 4" MBRP Turbo Back, AirRaid, Edge Chip w/Pyro