Tutorial: How to install HID's in Fog Lights - Focus Fanatics
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Focus Fanatics > Ford Focus First Generation > MK1 Focus

MK1 Focus The place to chat about general questions, window tinting, exterior body, interior and lighting upgrades for the first generation 2000-2007 Focus.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-04-2013, 02:23 PM   #1
slinkmerc
Focus Jr. Enthusiast
 
Join Date: Feb 2013
Fan#: 109901
Location: Carlsbad, CA
What I Drive: 2002 Silver ZX3

Posts: 46
FF Reputation: 2 slinkmerc Good Standing Member
Buy-Sell-Trade Rating: (1)
Tutorial: How to install HID's in Fog Lights

I'm not sure if this is the correct place for this, if it's not please forgive me and move to correct place please.

My car: 2002 ZX3 This should apply to foci with 899 fog lights(Correct me if i'm wrong please)

What I needed for the conversion: Ratchet with 10mm socket ( I used a 1/4 inch ratchet), A phillips head screw driver, and a 10mm---> thing I dont know what it's called but it is pictured below,Electrical Tape, and of course the HID kit, which is the 880 kit




First I started by lying on my back and peeking under the bumper (if your car is lowered I would suggest you use a jack and jack stands).
I unplugged the connector to the 899 fog light and twisted the bulb and pulled it out.


YAY!! it's out, now install the HID bulb in the reverse order of the 899 bulb.



Now take the two prongs that are part of the HID assembly and stick them into the cars wiring harness RED mating to the GREEN SIDE and BLACK MATING TO BLACK (refer to picture) Once that is hooked up tape that sucker with electrical tape!





I apologize for the picture being blurry, camera wouldn't focus but you get the idea right?

Next is time to hook everything up to the ballast and I'll just show you how to do that as opposed to me trying to find the words to explain it.







You are pretty much done at this Point fog lights should look like this:



Once you do the one side the other side is exactly the same! :)

Edit:

Nightime, No one had to pull over when in front or next to me. i was even behind cops and wasn't pulled over, no problems basically. I believe i can safely say that HID's in fogs are ok if done correctly. But headlights are a seperate beast.


Edit #2: Will post better picture of the beam from a farther distance but for now this is all I have.


My kit came with a mounting bracket plus screws so i screwed the bracket to the ballast and mounted on the piece of metal directly behind the fog light assembly, your kit might come with a sticky pad which makes mounting a little easier. Goodluck! and hope I helped.
In case you were wondering the tools were for mounting bracket for the ballast.


Edit#3



Here is halogen vs HID low beams, and high beam halogen VS low beam HID (I do not have High beam HID's)



Last edited by slinkmerc; 03-12-2013 at 03:54 PM.
slinkmerc is offline  
    Reply With Quote
 

Bookmarks & Social Networks
-->
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:48 AM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Terms of Use : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Acura TLX or Fiesta ST. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area.