How-To: Focus Amplifier Install

[vollmas]

Hey guys. I am brand new to this forum, and I was looking for something exactly like this. However, I don't seem to be able to see any of the pictures or steps at the start of this thread. Was it deleted?

[johnriii44]

Originally Posted by JD770

I can't see any pictures? Am I missing something?

Originally Posted by vollmas

Hey guys. I am brand new to this forum, and I was looking for something exactly like this. However, I don't seem to be able to see any of the pictures or steps at the start of this thread. Was it deleted?

This thread was posted almost 10 years ago so it's no wonder there are no pictures.

The fender wire run is fairly straightforward. The most difficult part is pulling the wire through the fender (need a stiff feed line to pull wire through; I used a coat hanger) and fitting the larger size wires through the grommet into the cabin on the drivers' side.

[freemind]

It is easier to push the wire through the firewall into the engine compartment FWIW

[qweesy]

no pics

[johnriii44]

Originally Posted by qweesy

no pics

Originally Posted by johnriii44

This thread was posted almost 10 years ago so it's no wonder there are no pictures.

The fender wire run is fairly straightforward. The most difficult part is pulling the wire through the fender (need a stiff feed line to pull wire through; I used a coat hanger) and fitting the larger size wires through the grommet into the cabin on the drivers' side.