Which mount?

[phocusphreak]

Excess vibration in the cabin. Which mount would most likely be the issue?

[ManiacalZX3]

I heard this is normally the trans mount gets ice and or snow packed in it. Then the mount gets a little harder from the cold. If this is the case just scrap the ice or snow out of the and it shouls make it better.

[my_beautious_ZX3]

alot of us saw our vibrations go way down after replacing the passenger side (hydraulic) mount

[mikeeshaq]

passenger mount and dog bone and possible the transmission mount\
Just change all three

[phocusphreak]

which ones are the easiest?

Originally Posted by mikeeshaq

passenger mount and dog bone and possible the transmission mount\
Just change all three

[phocusphreak]

Originally Posted by phocusphreak

which ones are the easiest?

looks like the dogbone is and the cheapest... dont need to support anything swapping this mount out? O_o

[Milton]

While this may not be your exact vehicle, it is a recent experience with a link to a "How to" guide. The guide contains Motorcraft part numbers and prices.

How To Replace Engine Mounts On A 2007 Ford Focus

[sailor]

Passenger side is the most common culprit, and with many reporting replacing aftermarket ones repeatedly we recommend using the Ford one there for a stock replacement.

Hydraulic Jack & a block of wood for supporting the engine is required for this fix. (scissors screw type could be used as well, just more effort involved)

Luck!