swapping hubs

[thejordan]

if you want it purely for wheels, just get some conversion spacers for $200-300. PM me and I can recommend a place that will custom make them out of forged aluminum to spec. I ran 20mm on my subaru with no issues. Just remember, whatever offset wheels you get, subtract 20mm (spacers). A +55 wheel would be +35 which will be aggressive if you don't have rolled fenders and f/r camber adjustment.

[suss6052]

Originally Posted by Supramk3

isnt this platform shared with mazdas?

The MK2 European Focus and the first gen MZ3 shared a platform, however the 3 stayed behind on the original C1 platform while the Focus was on an enhanced version. However from the beginning of the MK2's release they always used the 5x108 mm bolt pattern, same as the Volvo S40/V50, where as the MZ3 used the 5x114.3 bolt circle instead because they are Japanese and had to be difficult essentially.

[thejordan]

Originally Posted by suss6052

The MK2 European Focus and the first gen MZ3 shared a platform, however the 3 stayed behind on the original C1 platform while the Focus was on an enhanced version. However from the beginning of the MK2's release they always used the 5x108 mm bolt pattern, same as the Volvo S40/V50, where as the MZ3 used the 5x114.3 bolt circle instead because they are Japanese and had to be difficult essentially.

Toyota is worse lol

[jmdoc66]

Wonder if redrilling is an option. I'll have to look into it. thanks for the input.

[Supramk3]

Originally Posted by thejordan

Toyota is worse lol

hey hey i take offense to that lol