Originally Posted by Zillon
I removed the endlinks entirely and ziptied the sway bar tight with heavy duty wire ties, with tension in both directions (up and down). That thing wasn't moving anywhere.
Regardless of what I did, the noise didn't improve when I removed the endlinks or mass dampers.
The last thing I did prior to trading the car was reinstall the stock dampers, strut bearings, mounts, and associated hardware. The noise got worse after reinstalling the factory bits.
Zillon ,when you unhooked the endlinks on the front sway bar how did the car handle ?did you notice an increase in side to side movement(rocking),or any changes in handling on your test drive. thanks