zx3 dohc solid lifter adjusment updated discussion

200two-zx3 · 01-16-2013, 07:41 PM

Ok I've spent hrs searching for a thread about this subject there are a few but all of thm re rom 2009 or older and non have answers so I thought I might be able to inquire on some help from the forum...

I'm running into this issue with my 02 zx3, I have pittine in my exhaust valve face area, so I took it to my local performance shop to have the valves ground and then realized if I did this id need new buckets or lifters whatever you like to call it, has any one found any new info on this, I've found these pt numbers but still haven't found anyone who sells them???
Thanks

YS4Z-6500-DAD

SELECT-FIT 17.145MM THICK
YS4Z-6500-EA

SELECT-FIT 17.175MM THICK
YS4Z-6500-EAB

SELECT-FIT 17.205MM THICK
YS4Z-6500-EAC

SELECT-FIT 17.235MM THICK
YS4Z-6500-EAD

SELECT-FIT 17.265MM THICK
YS4Z-6500-FA

SELECT-FIT 17.295MM THICK
YS4Z-6500-FAB

SELECT-FIT 17.325MM THICK
YS4Z-6500-FAC

SELECT-FIT 17.355MM THICK
YS4Z-6500-FAD

SELECT-FIT 17.385MM THICK
YS4Z-6500-GA

SELECT-FIT 17.415MM THICK
YS4Z-6500-GAB

SELECT-FIT 17.445MM THICK
YS4Z-6500-GAC