Mazda3-5 MS3 MotorMounts Fit 2012 Focus

[suss6052]

Originally Posted by JL330

Duros?

Durometer is one of several measures of the hardness of a material. Hardness may be defined as a material's resistance to permanent indentation. The durometer scale was defined by Albert F. Shore, who developed a measurement device called a durometer in the 1920s. The term durometer is often used to refer to the measurement, as well as the instrument itself. Durometer is typically used as a measure of hardness in polymers, elastomers, and rubbers.

Basically the higher the durometer the harder the rubber is and the more vibrations are permitted to translate through the structure increasing the discomfort factor and potentially damaging things in the long run as things are made to take more strain/ stress than normal.

[JL330]

Originally Posted by suss6052

Basically the higher the durometer the harder the rubber is and the more vibrations are permitted to translate through the structure increasing the discomfort factor and potentially damaging things in the long run as things are made to take more strain/ stress than normal.

I think I'll go with the ms3 for price reasons and just adjust inserts as I see fit. I just have to figure out where to buy those.

[Brabs_Weather]

Originally Posted by JL330

And it's better than the ms3 one?

you can use the same bolt as the stock Ford RRM but the MS3 requires a new bolt. When you remove the RMM and the mount you will be able to easily move the motor around which is very sad. :-(

[Sonic_HedgeHog]

Park Mazda, great prices and great customer service!


They may have changed the part numbers slightly, but it'll get you going

[Tommyatomic]

Anyone know if there is a differient part number for the E-Focus mount in Canada.

My dealer parts dept cant seem to find CM5Z-6068-A

[Sonic_HedgeHog]

I thought everything ended in Eh not A in Canada LOL

[Deftmetal]

Originally Posted by Sonic_HedgeHog

I thought everything ended in Eh not A in Canada LOL

Of course everything ends in eh.

[Tommyatomic]

Originally Posted by Sonic_HedgeHog

I thought everything ended in Eh not A in Canada LOL

No good. Canadian slang sentences structure standards require Eh at the end of a question. There is some debate regarding its use at the end of a statement.

The use of Eh would not apply to a part number.

[Sonic_HedgeHog]

You should be able to just go in and ask for an electric RMM

[Tommyatomic]

Originally Posted by Sonic_HedgeHog

You should be able to just go in and ask for an electric RMM

Also no good. The focus electric has not made it to Canada yet or at least not to BC. Its on the ford.ca website but when I asked about them at the dealership they looked at my like I was insane.

Carp. I'm just gonna have to order it online. I hate when that happens.